Corrigendum

The following problems with the specification dated April 2011 have been rectified as described below.

1. Problem

Various parts of the the documentation refer to stand-alone concepts, which were part of earlier draft releases but ultimately excluded from the final release of the standard.

Rectification

The documentation of the Structure element (line 40) has been updated to remove this reference.

1. Introduction

At the core of the SDMX XML messages are the message namespaces. These namespaces define the general structure of all messages and define the specific messages that are available for exchange in SDMX.

There are two namespaces associated with the messages. The main namespace schema which defines every message in SDMX is http://www.sdmx.org/resources/sdmxml/schemas/v2_1/message. Associated with this is another sub-namespace, http://www.sdmx.org/resources/sdmxml/schemas/v2_1/message/footer. This namespace defines footer level information that is available in messages which might require non-standard payload information to be transmitted.

In general, every message in SDMX follows common format of:

• Header
• Payload (0..n)
• Footer (0..1)

The header and payload elements exist in the message namespace, but the content of the payload is defined in the namespaces that are specific the functionality of the messages. Note that the header follows a common construct, which is then restricted according to the requirements of the message which is using it.

2. Schema Documentation

2.1 Message Namespace

http://www.sdmx.org/resources/sdmxml/schemas/v2_1/message

2.1.1 Summary

Referenced Namespaces:

Contents:
50 Global Elements
62 Complex Types
1 Simple Type

2.1.2 Global Elements

Structure (StructureType): Structure is a message that contains structural metadata. It may contain any of the following; categorisations, category schemes, code lists, concepts (concept schemes), constraints (attachment and content) data flows, hierarchical code lists, metadata flows, metadata structure definitions, organisation schemes, processes, reporting taxonomies, and structure sets.

GenericData (GenericDataType): GenericData is used to convey data in a non data structure specific form. Data sets in this message will be each have a related structure specification in the header, which states the data structure the data conforms to and how the data is organised (i.e. the observation dimension).

GenericTimeSeriesData (GenericTimeSeriesDataType): GenericTimeSeriesData is a special derivation of the generic data message which only allows for time series oriented date (i.e. the observation dimension must be time). Although this is a different message, the content of this message will be exactly the same as a generic data message that specifies time as the observation dimension; therefore no additional processing requirements are necessary. This message is intended to only be used when it is necessary to restrict an exchange to being only time series based data.

StructureSpecificData (StructureSpecificDataType): StructureSpecificData is used to convey data structure specific according to data structure definition. The payload of this message (i.e. the data sets) will be based on XML schemas which are specific to the data structure definition and the orientation (i.e. the observation dimension) of the data.

StructureSpecificTimeSeriesData (StructureSpecificTimeSeriesDataType): StructureSpecificTimeSeriesData is a special derivation of the structure specific data message which only allows for time series oriented date (i.e. the observation dimension must be time). Although this is a different message, the content of this message will be exactly the same as a structure specific data message that specifies time as the observation dimension; therefore no additional processing requirements are necessary. This message is intended to only be used when it is necessary to restrict an exchange to being only time series based data.

GenericMetadata (GenericMetadataType): GenericMetadata contains reported metadata in a format which supports any metadata structure definition.

StructureSpecificMetadata (StructureSpecificMetadataType): StructureSpecificMetadata contains reported metadata in a format which is specific to the metadata structure definitions which define the structure of the metadata being reported. This format allows for validation of the metadata against the intended structure. Note that the each metadata set provided will be based on a metadata structure specific schema.

RegistryInterface (RegistryInterfaceType): RegistryInterface is used to conduct all interactions with the SDMX Registry Services.

SubmitRegistrationsRequest (SubmitRegistrationsRequestType): SubmitRegistrationsRequest is sent to the registry by an agency or data/metadata provider to request on or more registrations for a data set or metadata set. The data source to be registered must be accessible to the registry services at an indicated URL, so that it can be processed by those services.

SubmitRegistrationsResponse (SubmitRegistrationsResponseType): SubmitRegistrationsResponse is sent to the agency or data/metadata provider in response to a registration requests. It indicates the success or failure of each registration request, and contains any error messages generated by the registration service.

QueryRegistrationRequest (QueryRegistrationRequestType): QueryRegistrationRequest is used to query the contents of a registry for data sets and metadata sets. It specifies whether the result set should include metadata sets, data sets, or both. The search can be characterized by providing constraints including reference periods, data regions, and data keys.

QueryRegistrationResponse (QueryRegistrationResponseType): QueryRegistrationResponse is sent as a response to any query of the contents of a registry. The result set contains a set of links to data and/or metadata If the result set is null, or there is some other problem with the query, then appropriate error messages and statuses will be returned.

SubmitStructureRequest (SubmitStructureRequestType): SubmitStructureRequest is used to submit structure definitions to the repository. The structure resources (key families, agencies, concepts and concept schemes, code lists, etc.) to be submitted may be communicated in-line or be supplied in a referenced SDMX-ML Structure messages external to the registry. A response will indicate status and contain any relevant error information.

SubmitStructureResponse (SubmitStructureResponseType): SubmitStructureResponse is returned by the registry when a structure submission request is received. It indicates the status of the submission, and carries any error messages which are generated, if relevant.

SubmitSubscriptionsRequest (SubmitSubscriptionsRequestType): SubmitSubscriptionsRequest contains one or more requests submitted to the registry to subscribe to registration and change events for specific registry resources.

SubmitSubscriptionsResponse (SubmitSubscriptionsResponseType): SubmitSubscriptionsResponse is the response to a submit subscriptions request. It contains information which describes the success or failure of each subscription request, providing any error messages in the event of failure. If successful, it returns the registry URN of the subscription, and the subscriber-assigned ID.

QuerySubscriptionRequest (QuerySubscriptionRequestType): QuerySubscriptionRequest is used to query the registry for the subscriptions of a given organisation.

QuerySubscriptionResponse (QuerySubscriptionResponseType): QuerySubscriptionResponse is sent as a response to a subscription query. If the query is successful, the details of all subscriptions for the requested organisation are sent.

NotifyRegistryEvent (NotifyRegistryEventType): NotifyRegistryEvent is sent by the registry services to subscribers, to notify them of specific registration and change events. Basic information about the event, such as the object that triggered it, the time of the event, the action that took place, and the subscription that triggered the notification are always sent. Optionally, the details of the changed object may also be provided.

StructureSpecificDataQuery (DataQueryType): StructureSpecificDataQuery is used to query SDMX compliant databases or web services for structure specific data.

GenericDataQuery (GenericDataQueryType): GenericDataQuery is used to query SDMX compliant databases or web services for generic data. This is actually a specialization of the structured data query, and therefore can be processed in the same manner.

GenericTimeSeriesDataQuery (GenericTimeSeriesDataQueryType): GenericTimeSeriesDataQuery is used to query SDMX compliant databases or web services for time series only generic data. This is actually a specialization of the generic data query, and therefore can be processed in the same manner. This message is intended to only be used when it is necessary to restrict an exchange to being only time series based data.

StructureSpecificTimeSeriesDataQuery (StructureSpecificTimeSeriesDataQueryType): StructureSpecificTimeSeriesDataQuery is used to query SDMX compliant databases or web services for time series only structure specific data. This is actually a specialization of the structure specific data query, and therefore can be processed in the same manner. This message is intended to only be used when it is necessary to restrict an exchange to being only time series based data.

GenericMetadataQuery (MetadataQueryType): GenericMetadataQuery is used to query SDMX compliant databases or web services for generic format reference metadata.

StructureSpecificMetadataQuery (MetadataQueryType): StructureSpecificMetadataQuery is used to query SDMX compliant databases or web services for metadata structure specific reference metadata.

DataSchemaQuery (DataSchemaQueryType): DataSchemaQuery is used to query SDMX compliant databases or web services for data structure specific schemas for the purpose of validating structured data.

MetadataSchemaQuery (MetadataSchemaQueryType): MetadataSchemaQuery is used to query SDMX compliant databases or web services for metadata structure specific schemas for the purpose of validating structured metadata.

StructuresQuery (StructuresQueryType): StructuresQuery is used to query SDMX compliant databases or web services for any structures based on simple maintainable object properties (e.g. all objects maintained by a maintenance agency).

DataflowQuery (DataflowQueryType): DataflowQuery is used to query SDMX compliant databases or web services for dataflows.

MetadataflowQuery (MetadataflowQueryType): MetadataflowQuery is used to query SDMX compliant databases or web services for metadata flows.

DataStructureQuery (DataStructureQueryType): DataStructureQuery is used to query SDMX compliant databases or web services for data structures definitions.

MetadataStructureQuery (MetadataStructureQueryType): MetadataStructureQuery is used to query SDMX compliant databases or web services for metadata structure definitions.

CategorySchemeQuery (CategorySchemeQueryType): CategorySchemeQuery is used to query SDMX compliant databases or web services for category schemes.

ConceptSchemeQuery (ConceptSchemeQueryType): ConceptSchemeQuery is used to query SDMX compliant databases or web services for concept schemes.

CodelistQuery (CodelistQueryType): CodelistQuery is used to query SDMX compliant databases or web services for codelists.

HierarchicalCodelistQuery (HierarchicalCodelistQueryType): HierarchicalCodelistQuery is used to query SDMX compliant databases or web services for hierarchical codelists.

OrganisationSchemeQuery (OrganisationSchemeQueryType): OrganisationSchemeQuery is used to query SDMX compliant databases or web services for organisation schemes.

ReportingTaxonomyQuery (ReportingTaxonomyQueryType): ReportingTaxonomyQuery is used to query SDMX compliant databases or web services for reporting taxonomies.

StructureSetQuery (StructureSetQueryType): StructureSetQuery is used to query SDMX compliant databases or web services for structure sets.

ProcessQuery (ProcessQueryType): ProcessQuery is used to query SDMX compliant databases or web services for processes.

CategorisationQuery (CategorisationQueryType): CategorisationQuery is used to query SDMX compliant databases or web services for categorisations.

ProvisionAgreementQuery (ProvisionAgreementQueryType): ProvisionAgreementQuery is used to query SDMX compliant databases or web services for provision agreements.

ConstraintQuery (ConstraintQueryType): ConstraintQuery is used to query SDMX compliant databases or web services for constraints.

TransformationSchemeQuery (TransformationSchemeQueryType): TransformationSchemeQuery is used to query SDMX compliant databases or web services for transformation schemes.

VtlMappingSchemeQuery (VtlMappingSchemeQueryType): VtlMappingSchemeQuery is used to query SDMX compliant databases or web services for VTL mapping schemes.

NamePersonalisationSchemeQuery (NamePersonalisationSchemeQueryType): NamePersonalisationSchemeQuery is used to query SDMX compliant databases or web services for name personalisation schemes.

RulesetSchemeQuery (RulesetSchemeQueryType): RulesetSchemeQuery is used to query SDMX compliant databases or web services for ruleset schemes.

UserDefinedOperatorSchemeQuery (UserDefinedOperatorSchemeQueryType): UserDefinedOperatorSchemeQuery is used to query SDMX compliant databases or web services for user defined schemes.

CustomTypeSchemeQuery (CustomTypeSchemeQueryType): CustomTypeSchemeQuery is used to query SDMX compliant databases or web services for custom type schemes.

Error (ErrorType): Error is used to communicate that an error has occurred when responding to a request in an non-registry environment. The content will be a collection of error messages.

2.1.3 Complex Types

MessageType: MessageType is an abstract type which is used by all of the messages, to allow inheritance of common features. Every message consists of a mandatory header, followed by optional payload (which may occur multiple times), and finally an optional footer section for conveying error, warning, and informational messages.

Content:

Header, {any element with namespace of http://www.sdmx.org/resources/sdmxml/schemas/v2_1/message}*, ftr:Footer?

Element Documentation:

StructureType: StructureType defines the contents of a structure message. The payload is optional since this message may be returned from a web service with only information in the footer.

Derivation:

• MessageType (restriction)
  • StructureType

Content:
Header, Structures?, ftr:Footer?

Element Documentation:

GenericDataType: GenericDataType defines the contents of a generic data message.

Derivation:

• MessageType (restriction)
  • GenericDataType

Content:
Header, DataSet*, ftr:Footer?

Element Documentation:

GenericTimeSeriesDataType: GenericTimeSeriesDataType defines the structure of the generic time series data message.

Derivation:

• MessageType (restriction)
  • GenericDataType (restriction)
    • GenericTimeSeriesDataType

Content:
Header, DataSet*, ftr:Footer?

Element Documentation:

StructureSpecificDataType: StructureSpecificDataType defines the structure of the structure specific data message. Note that the data set payload type is abstract, and therefore it will have to be assigned a type in an instance. This type must be derived from the base type referenced. This base type defines a general structure which can be followed to allow for generic processing of the data even if the exact details of the data structure specific format are not known.

Derivation:

• MessageType (restriction)
  • StructureSpecificDataType

Content:
Header, DataSet*, ftr:Footer?

Element Documentation:

StructureSpecificTimeSeriesDataType: StructureSpecificTimeSeriesDataType defines the structure of the structure specific time series data message.

Derivation:

• MessageType (restriction)
  • StructureSpecificDataType (restriction)
    • StructureSpecificTimeSeriesDataType

Content:
Header, DataSet*, ftr:Footer?

Element Documentation:

GenericMetadataType: GenericMetadataType defines the contents of a generic metadata message.

Derivation:

• MessageType (restriction)
  • GenericMetadataType

Content:
Header, MetadataSet*, ftr:Footer?

Element Documentation:

StructureSpecificMetadataType: StructureSpecificMetadataType defines the structure of a structure specific metadata message. Note that the metadata set payload type is abstract, and therefore it will have to be assigned a type in an instance. This type must be derived from the base type referenced. This base type defines a general structure which can be followed to allow for generic processing of the data even if the exact details of the data structure specific format are not known.

Derivation:

• MessageType (restriction)
  • StructureSpecificMetadataType

Content:
Header, MetadataSet*, ftr:Footer?

Element Documentation:

RegistryInterfaceType: This is a type which describes a structure for holding all of the various dedicated registry interface message types.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType

Content:
Header, (SubmitRegistrationsRequest | SubmitRegistrationsResponse | QueryRegistrationRequest | QueryRegistrationResponse | SubmitStructureRequest | SubmitStructureResponse | SubmitSubscriptionsRequest | SubmitSubscriptionsResponse | QuerySubscriptionRequest | QuerySubscriptionResponse | NotifyRegistryEvent)?, ftr:Footer?

Element Documentation:

SubmitRegistrationsRequestType: SubmitRegistrationsRequestType defines the structure of a registry submit registration requests document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitRegistrationsRequestType

Content:
Header, SubmitRegistrationsRequest

Element Documentation:

SubmitRegistrationsResponseType: SubmitRegistrationsResponseType defines the structure of a registry submit registration response document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitRegistrationsResponseType

Content:
Header, SubmitRegistrationsResponse, ftr:Footer?

Element Documentation:

QueryRegistrationRequestType: QueryRegistrationRequestType defines the structure of a registry query registration request document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • QueryRegistrationRequestType

Content:
Header, QueryRegistrationRequest

Element Documentation:

QueryRegistrationResponseType: SubmitRegistrationRequestType defines the structure of a registry submit registration response document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • QueryRegistrationResponseType

Content:
Header, QueryRegistrationResponse, ftr:Footer?

Element Documentation:

SubmitStructureRequestType: SubmitStructureRequestType defines the structure of a registry submit structure request document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitStructureRequestType

Content:
Header, SubmitStructureRequest

Element Documentation:

SubmitStructureResponseType: SubmitStructureResponseType defines the structure of a registry submit registration response document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitStructureResponseType

Content:
Header, SubmitStructureResponse, ftr:Footer?

Element Documentation:

SubmitSubscriptionsRequestType: SubmitSubscriptionsRequestType defines the structure of a registry submit subscription request document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitSubscriptionsRequestType

Content:
Header, SubmitSubscriptionsRequest

Element Documentation:

SubmitSubscriptionsResponseType: SubmitSubscriptionsResponseType defines the structure of a registry submit subscription response document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • SubmitSubscriptionsResponseType

Content:
Header, SubmitSubscriptionsResponse, ftr:Footer?

Element Documentation:

QuerySubscriptionRequestType: QuerySubscriptionRequestType defines the structure of a registry query subscription request document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • QuerySubscriptionRequestType

Content:
Header, QuerySubscriptionRequest

Element Documentation:

QuerySubscriptionResponseType: QuerySubscriptionResponseType defines the structure of a registry query subscription response document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • QuerySubscriptionResponseType

Content:
Header, QuerySubscriptionResponse, ftr:Footer?

Element Documentation:

NotifyRegistryEventType: NotifyRegistryEventType defines the structure of a registry notification document.

Derivation:

• MessageType (restriction)
  • RegistryInterfaceType (restriction)
    • NotifyRegistryEventType

Content:
Header, NotifyRegistryEvent

Element Documentation:

DataQueryType: DataQueryType defines the structure of a data query message.

Derivation:

• MessageType (restriction)
  • DataQueryType

Content:
Header, Query

Element Documentation:

GenericDataQueryType: DataQueryType defines the structure of a generic data query message.

Derivation:

• MessageType (restriction)
  • DataQueryType (restriction)
    • GenericDataQueryType

Content:
Header, Query

Element Documentation:

GenericTimeSeriesDataQueryType: GenericTimeSeriesDataQueryType defines the structure of a time series generic data query message.

Derivation:

• MessageType (restriction)
  • DataQueryType (restriction)
    • GenericDataQueryType (restriction)
      • GenericTimeSeriesDataQueryType

Content:
Header, Query

Element Documentation:

StructureSpecificTimeSeriesDataQueryType: StructureSpecificTimeSeriesDataQueryType defines the structure of a time series generic data query message.

Derivation:

• MessageType (restriction)
  • DataQueryType (restriction)
    • StructureSpecificTimeSeriesDataQueryType

Content:
Header, Query

Element Documentation:

MetadataQueryType: MetadataQueryType defines the structure of a reference metadata query message.

Derivation:

• MessageType (restriction)
  • MetadataQueryType

Content:
Header, Query

Element Documentation:

DataSchemaQueryType: DataSchemaQueryType defines the structure of a data schema query message.

Derivation:

• MessageType (restriction)
  • DataSchemaQueryType

Content:
Header, Query

Element Documentation:

MetadataSchemaQueryType: MetadataSchemaQueryType defines the structure of a metadata schema query message.

Derivation:

• MessageType (restriction)
  • MetadataSchemaQueryType

Content:
Header, Query

Element Documentation:

StructuresQueryType: StructuresQueryType defines the structure of a structures query message.

Derivation:

• MessageType (restriction)
  • StructuresQueryType

Content:
Header, Query

Element Documentation:

DataflowQueryType: DataflowQueryType defines the structure of a dataflow query message.

Derivation:

• MessageType (restriction)
  • DataflowQueryType

Content:
Header, Query

Element Documentation:

MetadataflowQueryType: MetadataflowQueryType defines the structure of a metadata flow query message.

Derivation:

• MessageType (restriction)
  • MetadataflowQueryType

Content:
Header, Query

Element Documentation:

DataStructureQueryType: KeyFamilyQueryType defines the structure of a data structure query message.

Derivation:

• MessageType (restriction)
  • DataStructureQueryType

Content:
Header, Query

Element Documentation:

MetadataStructureQueryType: MetadataStructureQueryType defines the structure of a metadata structure query message.

Derivation:

• MessageType (restriction)
  • MetadataStructureQueryType

Content:
Header, Query

Element Documentation:

CategorySchemeQueryType: CategorySchemeQueryType defines the structure of a category scheme query message.

Derivation:

• MessageType (restriction)
  • CategorySchemeQueryType

Content:
Header, Query

Element Documentation:

ConceptSchemeQueryType: ConceptSchemeQueryType defines the structure of a concept scheme query message.

Derivation:

• MessageType (restriction)
  • ConceptSchemeQueryType

Content:
Header, Query

Element Documentation:

CodelistQueryType: CodelistQueryType defines the structure of a codelist query message.

Derivation:

• MessageType (restriction)
  • CodelistQueryType

Content:
Header, Query

Element Documentation:

HierarchicalCodelistQueryType: HierarchicalCodelistQueryType defines the structure of a hierarchical codelist query message.

Derivation:

• MessageType (restriction)
  • HierarchicalCodelistQueryType

Content:
Header, Query

Element Documentation:

OrganisationSchemeQueryType: OrganisationSchemeQueryType defines the structure of an organisation scheme query message.

Derivation:

• MessageType (restriction)
  • OrganisationSchemeQueryType

Content:
Header, Query

Element Documentation:

ReportingTaxonomyQueryType: ReportingTaxonomyQueryType defines the structure of a reporting taxonomy query message.

Derivation:

• MessageType (restriction)
  • ReportingTaxonomyQueryType

Content:
Header, Query

Element Documentation:

StructureSetQueryType: StructureSetQueryType defines the structure of a structure set query message.

Derivation:

• MessageType (restriction)
  • StructureSetQueryType

Content:
Header, Query

Element Documentation:

ProcessQueryType: CategorizationQueryType defines the structure of a categorization query message.

Derivation:

• MessageType (restriction)
  • ProcessQueryType

Content:
Header, Query

Element Documentation:

CategorisationQueryType: CategorisationQueryType defines the structure of a categorisation query message.

Derivation:

• MessageType (restriction)
  • CategorisationQueryType

Content:
Header, Query

Element Documentation:

ProvisionAgreementQueryType: ProvisionAgreementQueryType defines the structure of a provision agreement query message.

Derivation:

• MessageType (restriction)
  • ProvisionAgreementQueryType

Content:
Header, Query

Element Documentation:

ConstraintQueryType: ConstraintQueryType defines the structure of a constraint query message.

Derivation:

• MessageType (restriction)
  • ConstraintQueryType

Content:
Header, Query

Element Documentation:

TransformationSchemeQueryType: TransformationSchemeQueryType defines the structure of a transformation scheme query message.

Derivation:

• MessageType (restriction)
  • TransformationSchemeQueryType

Content:
Header, Query

Element Documentation:

VtlMappingSchemeQueryType: VtlMappingSchemeQueryType defines the structure of a VTL mappings scheme query message.

Derivation:

• MessageType (restriction)
  • VtlMappingSchemeQueryType

Content:
Header, Query

Element Documentation:

NamePersonalisationSchemeQueryType: NamePersonalisationSchemeQueryType defines the structure of a name personalisation scheme query message.

Derivation:

• MessageType (restriction)
  • NamePersonalisationSchemeQueryType

Content:
Header, Query

Element Documentation:

RulesetSchemeQueryType: RulesetSchemeQueryType defines the structure of a ruleset scheme query message.

Derivation:

• MessageType (restriction)
  • RulesetSchemeQueryType

Content:
Header, Query

Element Documentation:

UserDefinedOperatorSchemeQueryType: UserDefinedOperatorSchemeQueryType defines the structure of a user defined operator scheme query message.

Derivation:

• MessageType (restriction)
  • UserDefinedOperatorSchemeQueryType

Content:
Header, Query

Element Documentation:

CustomTypeSchemeQueryType: CustomTypeSchemeQueryType defines the structure of a custom type scheme query message.

Derivation:

• MessageType (restriction)
  • CustomTypeSchemeQueryType

Content:
Header, Query

Element Documentation:

ErrorType: ErrorType describes the structure of an error response.

Content:
ErrorMessage+

Element Documentation:

BaseHeaderType: BaseHeaderType in an abstract base type that defines the basis for all message headers. Specific message formats will refine this

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure*, DataProvider?, DataSetAction?, DataSetID*, Extracted?, ReportingBegin?, ReportingEnd?, EmbargoDate?, Source*

Element Documentation:

StructureHeaderType: StructureHeaderType defines the structure for structural metadata messages.

Derivation:

• BaseHeaderType (restriction)
  • StructureHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Source*

Element Documentation:

GenericDataHeaderType: GenericDataHeaderType defines the header structure for a generic data message.

Derivation:

• BaseHeaderType (restriction)
  • GenericDataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure+, DataProvider?, DataSetAction?, DataSetID*, Extracted?, ReportingBegin?, ReportingEnd?, EmbargoDate?, Source*

Element Documentation:

GenericTimeSeriesDataHeaderType: GenericTimeSeriesDataHeaderType defines the header structure for a time series only generic data message.

Derivation:

• BaseHeaderType (restriction)
  • GenericDataHeaderType (restriction)
    • GenericTimeSeriesDataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure, DataProvider?, DataSetAction?, DataSetID*, Extracted?, ReportingBegin?, ReportingEnd?, EmbargoDate?, Source*

Element Documentation:

StructureSpecificDataHeaderType: StructureSpecificDataHeaderType defines the header structure for a structure specific data message.

Derivation:

• BaseHeaderType (restriction)
  • StructureSpecificDataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure+, DataProvider?, DataSetAction?, DataSetID*, Extracted?, ReportingBegin?, ReportingEnd?, EmbargoDate?, Source*

Element Documentation:

StructureSpecificTimeSeriesDataHeaderType: StructureSpecificTimeSeriesDataHeaderType defines the header structure for a time series only structure specific data message.

Derivation:

• BaseHeaderType (restriction)
  • StructureSpecificDataHeaderType (restriction)
    • StructureSpecificTimeSeriesDataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure+, DataProvider?, DataSetAction?, DataSetID*, Extracted?, ReportingBegin?, ReportingEnd?, EmbargoDate?, Source*

Element Documentation:

GenericMetadataHeaderType: GenericMetadataHeaderType defines the header format for generic reference metadata.

Derivation:

• BaseHeaderType (restriction)
  • GenericMetadataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure+, DataProvider?, DataSetAction?, DataSetID*, Extracted?, Source*

Element Documentation:

StructureSpecificMetadataHeaderType: StructureSpecificMetadataHeaderType defines the header format for metadata structure definition specific reference metadata messages.

Derivation:

• BaseHeaderType (restriction)
  • StructureSpecificMetadataHeaderType

Content:
ID, Test, Prepared, Sender, Receiver*, com:Name*, Structure+, DataProvider?, DataSetAction?, DataSetID*, Extracted?, Source*

Element Documentation:

BasicHeaderType: BasicHeaderType defines the most basic header information used in simple message exchanges.

Derivation:

• BaseHeaderType (restriction)
  • BasicHeaderType

Content:
ID, Test, Prepared, Sender, Receiver

Element Documentation:

PartyType: PartyType defines the information which is sent about various parties such as senders and receivers of messages.

Attributes:

id

Content:
com:Name*, Contact*

Attribute Documentation:

Element Documentation:

SenderType: SenderType extends the basic party structure to add an optional time zone declaration.

Derivation:

• PartyType (extension)
  • SenderType

Attributes:
id

Content:
com:Name*, Contact*, Timezone?

Attribute Documentation:

Element Documentation:

ContactType: ContactType provides defines the contact information about a party.

Content:
com:Name*, Department*, Role*, (Telephone | Fax | X400 | URI | Email)*

Element Documentation:

2.1.4 Simple Types

HeaderTimeType: Provides a union type of xs:date and xs:dateTime for the header fields in the message.

Union of:
xs:dateTime, xs:date.

2.2 Message Footer Namespace

http://www.sdmx.org/resources/sdmxml/schemas/v2_1/message/footer

2.2.1 Summary

Referenced Namespaces:

Contents:
1 Global Element
2 Complex Types
1 Simple Type

2.2.2 Global Elements

Footer (FooterType): Footer is used to communicate information such as error and warnings after the payload of a message.

2.2.3 Complex Types

FooterType: FooterType describes the structure of a message footer. The footer is used to convey any error, information, or warning messages. This is to be used when the message has payload, but also needs to communicate additional information. If an error occurs and no payload is generated, an Error message should be returned.

Content:
Message+

Element Documentation:

FooterMessageType: FooterMessageType defines the structure of a message that is contained in the footer of a message. It is a status message that have a severity code of Error, Information, or Warning added to it.

Derivation:

• com:StatusMessageType (restriction)
  • com:CodedStatusMessageType (extension)
    • FooterMessageType

Attributes:
code, severity?

Content:
com:Text+

Attribute Documentation:

Element Documentation:

2.2.4 Simple Types

SeverityCodeType:

Derived by restriction of xs:string .

Enumerations: