Skip to Content
Version 2.1 by Helena on 2025/05/21 13:57
Show last authors
1 {{box title="**Contents**"}}
2 {{toc/}}
3 {{/box}}
4
5 **Revision History**
6
7 |**Revision**|**Date**|**Contents**
8 | |April 2011|Initial release
9 |1.0|July 2011|Rectification of problems of the specifications dated April 2011
10 |2.0|July 2020|Addition of VTL (Validation and Transformation Language) package, maintainable artefacts, nameable artefacts to 5.2.3, 6.2.2, 6.2.3, 6.2.4, 7.1.1
11
12 **Corrigendum**
13
14 The following problems with the specification dated April 2011 have been rectified as described below.
15
16 1. **Problem**
17
18 Figure 17 - Logical Class Diagram of Registration of Data and Metadata – shows the Provision Agreement as it was identified in version 2.0, and not as it is identified in version 2.1.
19
20 **Rectification**
21
22 Provision Agreement is a Maintainable Artefact at version 2.1 and so the relationship is shown directly to the Provision Agreement class and not indirectly to the Provision Agreement via a ProvisionAgreementRef class.
23
24 **~1. Problem**
25
26 Figure 17 - Logical Class Diagram of Registration of Data and Metadata – shows the Registration class without the indexAttributes attribute.
27
28 **Rectification**
29
30 The attribute indexAttribute attribute is added to the Registration class and a description is of its purpose is given in the table at line 916.
31
32 **2. Problem**
33
34 Lines 437 and 648 of the April 2011 document mention that the fixed id for an AgencyScheme is AGENCY_SCHEME whereas it should be AGENCIES. **Rectification**
35
36 The reference to AGENCY_SCHEME is changed to AGENCIES.
37
38 **Adoption of the Validation and Transformation Language in 2020**
39
40 The SDMX specifications dated July 2011 envisaged the adoption of a language aimed at defining algorithms for the derivation of the data and presented a basic framework requiring however further elaboration for its actual use.
41
42 Following the adoption of the Validation and Transformation Language (VTL) version 2.0 and its application to SDMX 2.1, this section of the SDMX specifications has been integrated by introducing the VTL package, maintainable artefacts, nameable artefacts to the sections 5.2.3, 6.2.2, 6.2.3, 6.2.4 and 7.1.1.
43
44 = 1 Introduction =
45
46 The business vision for SDMX envisages the promotion of a “data sharing” model to facilitate low-cost, high-quality statistical data and metadata exchange. Data sharing reduces the reporting burden of organisations by allowing them to publish data once, and let their counterparties “pull” data and related metadata as required. The scenario is based on:
47
48 * the availability of an abstract information model capable of supporting timeseries and cross-sectional data, structural metadata, and reference metadata (SDMX-IM)
49 * standardised XML schemas derived from the model (SDMX-ML)
50 * the use of web-services technology (XML, XSD, WSDL, WADL)
51
52 Such an architecture needs to be well organised, and the SDMX Registry/Repository (SDMX-RR) is tasked with providing structure, organisation, and maintenance and query interfaces for most of the SDMX components required to support the datasharing vision.
53
54 However, it is important to emphasis that the SDMX-RR provides support for the submission and retrieval of all SDMX structural metadata and provisioning metadata. Therefore, the Registry not only supports the data sharing scenario, but this metadata is also vital in order to provide support for data and metadata reporting/collection, and dissemination scenarios.
55
56 Standard formats for the exchange of aggregated statistical data and metadata as prescribed in SDMX v2.1 are envisaged to bring benefits to the statistical community because data reporting and dissemination processes can be made more efficient.
57
58 As organisations migrate to SDMX enabled systems, many XML (and conventional) artefacts will be produced (e.g. Data Structure, Metadata Structure, Code List and Concept definitions (often collectively called structural metadata), XML schemas generated from data and metadata structure definitions, XSLT style-sheets for transformation and display of data and metadata, terminology references, etc.). The SDMX model supports interoperability, and it is important to be able to discover and share these artefacts between parties in a controlled and organized way.
59
60 This is the role of the registry.
61
62 With the fundamental SDMX standards in place, a set of architectural standards are needed to address some of the processes involved in statistical data and metadata exchange, with an emphasis on maintenance, retrieval and sharing of the structural metadata. In addition, the architectural standards support the registration and discovery of data and referential metadata.
63
64 These architectural standards address the ‘how’ rather than the ‘what’, and are aimed at enabling existing SDMX standards to achieve their mission. The architectural standards address registry services which initially comprise:
65
66 * structural metadata repository
67 * data and metadata registration
68 * query
69
70 The registry services outlined in this specification are designed to help the SDMX community manage the proliferation of SDMX assets and to support data sharing for reporting and dissemination.
71
72 = 2 Scope and Normative Status =
73
74 The scope of this document is to specify the logical interfaces for the SDMX registry in terms of the functions required and the data that may be present in the function call, and the behaviour expected of the registry.
75
76 In this document, functions and behaviours of the Registry Interfaces are described in four ways:
77
78 * in text
79 * with tables
80 * with UML diagrams excerpted from the SDMX Information Model (SDMX-IM)
81 * with UML diagrams that are not a part of the SDMX-IM but are included here for clarity and to aid implementations (these diagram are clearly marked as “Logical Class Diagram ...”)
82
83 Whilst the introductory section contains some information on the role of the registry, it is assumed that the reader is familiar with the uses of a registry in providing shared metadata across a community of counterparties.
84
85 Note that sections 5 and 6 contain normative rules regarding the Registry Interface and the identification of registry objects. Further, the minimum standard for access to the registry is via a REST interface (HTTP or HTTPS), as described in the appropriate sections. The notification mechanism must support e-mail and HTTP/HTTPS protocols as described. Normative registry interfaces are specified in the SDMX-ML specification (Part 03 of the SDMX Standard). All other sections of this document are informative.
86
87 Note that although the term “authorised user” is used in this document, the SDMX standards do not define an access control mechanism. Such a mechanism, if required, must be chosen and implemented by the registry software provider.
88
89 = 3 Scope of the SDMX Registry/Repository =
90
91 == 3.1 Objective ==
92
93 The objective of the SDMX registry/repository is, in broad terms, to allow organisations to publish statistical data and reference metadata in known formats such that interested third parties can discover these data and interpret them accurately and correctly. The mechanism for doing this is twofold:
94
95 1. To maintain and publish structural metadata that describes the structure and valid content of data and reference metadata sources such as databases, metadata repositories, data sets, metadata sets. This structural metadata enables software applications to understand and to interpret the data and reference metadata in these sources.
96 1. To enable applications, organisations, and individuals to share and to discover data and reference metadata. This facilitates data and reference metadata dissemination by implementing the data sharing vision of SDMX.
97
98 == 3.2 Structural Metadata ==
99
100 Setting up structural metadata and the exchange context (referred to as “data provisioning”) involves the following steps for maintenance agencies:
101
102 * agreeing and creating a specification of the structure of the data (called a Data Structure Definition or DSD in this document but also known as “key family”) which defines the dimensions, measures and attributes of a dataset and their valid value set
103 * if required, defining a subset or view of a DSD which allows some restriction of content called a “dataflow definition”
104 * agreeing and creating a specification of the structure of reference metadata (Metadata Structure Definition) which defines the attributes and presentational arrangement of a Metadataset and their valid values and content
105 * if required, defining a subset or view of a MSD which allows some restriction of content called a “metadataflow definition”
106 * defining which subject matter domains (specified as a Category Scheme) are related to the Dataflow and Metadataflow Definitions to enable browsing
107 * defining one or more lists of Data Providers (which includes metadata providers)
108 * defining which Data Providers have agreed to publish a given Dataflow and/or Metadataflow Definition - this is called a Provision Agreement
109
110 [[image:1747824122996-812.jpeg]]
111
112 **Figure 1: Schematic of the Basic Structural Artifacts in the SDMX-IM**
113
114 == 3.3 Registration ==
115
116 Publishing the data and reference metadata involves the following steps for a Data Provider:
117
118 * making the reference metadata and data available in SDMX-ML conformant data files or databases (which respond to an SDMX-ML query with SDMX-ML data). The data and reference metadata files or databases must be webaccessible, and must conform to an agreed Dataflow or Metadataflow Definition (Data Structure Definition or Metadata Structure Definition subset)
119 * registering the existence of published reference metadata and data files or databases with one or more SDMX registries
120
121 [[image:1747824123003-199.jpeg]]
122
123 **Figure 2: Schematic of Registered Data and Metadata Sources in the SDMX-IM**
124
125 == 3.4 Notification ==
126
127 Notifying interested parties of newly published or re-published data, reference metadata or changes in structural metadata involves:
128
129 * registry support of a subscription-based notification service which sends an email or notifies an HTTP address announcing all published data that meets the criteria contained in the subscription request
130
131 == 3.5 Discovery ==
132
133 Discovering published data and reference metadata involves interaction with the registry to fulfil the following logical steps that would be carried out by a user interacting with a service that itself interacts with the registry and an SDMX-enabled data or reference metadata resource:
134
135 * optionally browsing a subject matter domain category scheme to find Dataflow Definitions (and hence Data Structure Definitions) and Metadataflows which structure the type of data and/or reference metadata being sought
136 * build a query, in terms of the selected Data Structure Definition or Metadata Structure Definition, which specifies what data are required and submitting this to a service that can query an SDMX registry which will return a list of (URLs of) data and reference metadata files and databases which satisfy the query
137 * processing the query result set and retrieving data and/or reference metadata from the supplied URLs
138
139 [[image:1747824123006-476.jpeg]]
140
141 **Figure 3: Schematic of Data and Metadata Discovery and Query in the SDMX-IM**
142
143 = 4 SDMX Registry/Repository Architecture =
144
145 == 4.1 Architectural Schematic ==
146
147 The architecture of the SDMX registry/repository is derived from the objectives stated above. It is a layered architecture that is founded by a structural metadata repository which supports a provisioning metadata repository which supports the registry services. These are all supported by the SDMX-ML schemas. Applications can be built on top of these services which support the reporting, storage, retrieval, and dissemination aspects of the statistical lifecycle as well as the maintenance of the structural metadata required to drive these applications.
148
149 [[image:1747824123008-995.jpeg]]
150
151 **Figure 4: Schematic of the Registry Content and Services**
152
153 == 4.2 Structural Metadata Repository ==
154
155 The basic layer is that of a structural metadata service which supports the lifecycle of SDMX structural metadata artefacts such as Maintenance Agencies, Data Structure Definitions, Metadata Structure Definitions, Provision Agreements, Processes etc. This layer is supported by the Structure Submission and Query Service.
156
157 Note that the SDMX-ML Submit Structure Request message supports all of the SDMX structural artefacts. The only structural artefacts that are not supported by the SDMX-ML Submit Structure Request are::
158
159 * Registration of data and metadata sources
160 * Subscription and Notification
161
162 Separate registry-based messages are defined to support these artefacts.
163
164 == 4.3 Provisioning Metadata Repository ==
165
166 The function of this repository is to support the definition of the structural metadata that describes the various types of data-store which model SDMX-conformant databases or files, and to link to these data sources. These links can be specified for a data provider, for a specific data or metadata flow. In the SDMX model this is called the Provision Agreement.
167
168 This layer is supported by the Data and Metadata Registration Service.
169
170 = 5 Registry Interfaces and Services =
171
172 == 5.1 Registry Interfaces ==
173
174 The Registry Interfaces are:
175
176 * Notify Registry Event
177 * Submit Subscription Request
178 * Submit Subscription Response
179 * Submit Registration Request
180 * Submit Registration Response
181 * Query Registration Request
182 * Query Registration Response
183 * Query Subscription Request
184 * Query Subscription Response
185 * Submit Structure Request
186 * Submit Structure Response
187
188 The registry interfaces are invoked in one of two ways:
189
190 1. The interface is the name of the root node of the SDMX-ML document
191 1. The interface is invoked as a child element of the RegistryInterface message where the RegistryInterface is the root node of the SDMX-ML document.
192
193 In addition to these interfaces the registry must support a mechanism for querying for structural metadata. This is detailed in 5.2.2.
194
195 All these interactions with the Registry – with the exception of Notify Registry Event – are designed in pairs. The first document – the one which invokes the SDMX-RR interface, is a “Request” document. The message returned by the interface is a “Response” document.
196
197 It should be noted that all interactions are assumed to be synchronous, with the exception of Notify Registry Event. This document is sent by the SDMX-RR to all subscribers whenever an even occurs to which any users have subscribed. Thus, it does not conform to the request-response pattern, because it is inherently asynchronous.
198
199 == 5.2 Registry Services ==
200
201 === 5.2.1 Introduction ===
202
203 The services described in this section do not imply that each is implemented as a discrete web service.
204
205 === 5.2.2 Structure Submission and Query Service ===
206
207 This service must implement the following SDMX-ML Interfaces:
208
209 * SubmitStructureRequest
210 * SubmitStructureResponse
211
212 These interfaces allow structural definitions to be created, modified, and removed in a controlled fashion. It also allows the structural metadata artefacts to be queried and retrieved either in part or as a whole. In order for the architecture to be scalable, the finest-grained piece of structural metadata that can be processed by the SDMX-RR is a MaintainableArtefact (see next section on the SDMX Information Model).
213
214 === 5.2.3 Structure Query Service ===
215
216 The registry must support a mechanism for querying for structural metadata. This mechanism can be one or both of the SDMX-ML Query message and the SDMX REST interface for structural metadata (this is defined in Part 7 of the SDMX standards). The registry response to both of these query mechanisms is the SDMX Structure message which has as its root node
217
218 * Structure
219
220 The SDMX structural artefacts that may be queried are:
221
222 * dataflows and metadataflows
223 * data structure definitions and metadata structure definitions
224 * codelists
225 * concept schemes
226 * reporting taxonomies
227 * provision agreements
228 * structure sets
229 * processes
230 * hierarchical code lists
231 * constraints
232 * category schemes
233 * categorisations and categorised objects (examples are categorised dataflows and metadatflows, data structure definitions, metadata structure definitions, provision agreements registered data sources and metadata sources)
234 * organisation schemes (agency scheme, data provider scheme, data consumer scheme, organisation unit scheme)
235
236 Due to the VTL implementation the other structural artefact that may be queried are:
237
238 * transformation schemes
239 * custom type schemes
240 * name personalisation schemes
241 * vtl mapping schemes
242 * ruleset schemes
243 * user defined operator schemes
244
245 The SDMX query messages that are a part of the SDMX-ML Query message are:
246
247 * StructuresQuery
248 * DataflowQuery
249 * MetadataflowQuery
250 * DataStructureQuery
251 * MetadataStructureQuery
252 * CategorySchemeQuery
253 * ConceptScheneQuery
254 * CodelistQuery
255 * HierarchicalCodelistQuery
256 * OrganisationSchemeQuery
257 * ReportingTaxonomyQuery
258 * StructureSetQuery
259 * ProcessQuery
260 * CategorisationQuery
261 * ProvisionAgreementQuery
262 * ConstraintQuery
263
264 Due to the VTL implementation the other query messages that became a part of the SDMX-ML Query message are:
265
266 * TransformationSchemeQuery
267 * CustomTypeSchemeQuery
268 * VtlMappingSchemeQuery
269 * NamePersonalisationSchemeQuery
270 * RulesetSchemeQuery
271 * UserDefinedOperatorSchemeQuery
272
273 === 5.2.4 Data and Reference Metadata Registration Service ===
274
275 This service must implement the following SDMX-ML Interfaces:
276
277 * SubmitRegistrationRequest
278 * SubmitRegistrationResponse
279 * QueryRegistrationRequest
280 * QueryRegistrationResponse
281
282 The Data and Metadata Registration Service allows SDMX conformant XML files and web-accessible databases containing published data and reference metadata to be registered in the SDMX Registry. The registration process MAY validate the content of the data-sets or metadata-sets, and MAY extract a concise representation of the contents in terms of concept values (e.g. values of the data attribute, dimension, metadata attribute), or entire keys, and storing this as a record in the registry to enable discovery of the original data-set or metadata-set. These are called Constraints in the SDMX-IM.
283
284 The Data and Metadata Registration Service MAY validate the following, subject to the access control mechanism implemented in the Registry:
285
286 * that the data provider is allowed to register the data-set or metadata-set
287 * that the content of the data set or metadata set meets the validation constraints. This is dependent upon such constraints being defined in the structural repository and which reference the relevant Dataflow, Metadataflow, Data Provider, Data Structure Definition, Metadata Structure Definition, Provision Agreement
288 * that a queryable data source exists - this would necessitate the registration service querying the service to determine its existence
289 * that a simple data source exists (i.e. a file accessible at a URL)
290 * that the correct Data Structure Definition or Metadata Structure Definition is used by the registered data that the components (Dimensions, Attributes, Measures, Identifier Components etc.) are consistent with the Data Structure Definition or Metadata Structure Definition
291 *  that the valid representations of the concepts to which these components 382 correspond conform to the definition in the Data Structure Definition or Metadata Structure Definition
292
293 3The Registration has an action attribute which takes one of the following values:
294
295 |(% style="width:249px" %)(((
296 **Action Attribute Value**
297 )))|(% style="width:1622px" %)**Behaviour**
298 |(% style="width:249px" %)Append|(% style="width:1622px" %)Add this registration to the registry
299 |(% style="width:249px" %)Replace|(% style="width:1622px" %)Replace the existing Registration with this Registration identified by the id in the Registration of the Submit Registration Request
300 |(% style="width:249px" %)Delete|(% style="width:1622px" %)Delete the existing Registration identified by the id in the Registration of the Submit Registration Request
301
302 The Registration has three Boolean attributes which may be present to determine how an SDMX compliant Dataset or Metadata Set indexing application must index the Datasets or Metadata Set upon registration. The indexing application behaviour is as follows:
303
304 |**Boolean Attribute**|**Behaviour if Value is “true”**
305 |indexTimeSeries|A compliant indexing application must index all the time series keys (for a Dataset registration) or metadata target values (for a Metadata Set registration)
306 |indexDataSet|(((
307 A compliant indexing application must index the range of actual (present) values for each dimension of the Dataset (for a Dataset registration) or the range of actual (present) values for each Metadata Attribute which takes an enumerated value.
308
309 Note that for data this requires much less storage than full key indexing, but this method cannot guarantee that a specific combination of Dimension values (the Key) is actually present in the Dataset
310 )))
311 |indexReportingPeriod|A compliant indexing application must index the time period range(s) for which data are present in the Dataset or Metadata Set
312
313 === 5.2.5 Data and Reference Metadata Discovery ===
314
315 The Data and Metadata Discovery Service implements the following Registry Interfaces:
316
317 * QueryRegistrationRequest
318 * QueryRegistrationResponse
319
320 === 5.2.6 Subscription and Notification ===
321
322 The Subscription and Notification Service implements the following Registry Interfaces:
323
324 * SubmitSubscriptionRequest
325 * SubmitSubscriptionResponse
326 * NotifyRegistryEvent
327
328 The data sharing paradigm relies upon the consumers of data and metadata being able to pull information from data providers’ dissemination systems. For this to work efficiently, a data consumer needs to know when to pull data, i.e. when something has changed in the registry (e.g. a dataset has been updated and re-registered). Additionally, SDMX systems may also want to know if a new Data Structure Definition, Code List or Metadata Structure Definition has been added. The Subscription and Notification Service comprises two parts: subscription management, and notification.
329
330 Subscription management involves a user submitting a subscription request which contains:
331
332 * a query or constraint expression in terms of a filter which defines the events for which the user is interested (e.g. new data for a specific dataflow, or for a domain category, or changes to a Data Structure Definition).
333 * a list of URIs or end-points to which an XML notification message can be sent. Supported end-point types will be email (mailto~:) and HTTP POST (a normal http:~/~/ address)
334 * request for a list of submitted subscriptions
335 * deletion of a subscription
336
337 Notification requires that the structural metadata repository and the provisioning metadata repository monitor any event which is of interest to a user (the object of a subscription request query), and to issue an SDMX-ML notification document to the end-points specified in the relevant subscriptions.
338
339 === 5.2.7 Registry Behaviour ===
340
341 The following table defines the behaviour of the SDMX Registry for the various Registry Interface messages.
342
343 |(% style="width:143px" %)**Interface**|(% style="width:1729px" %)**Behaviour**
344 |(% style="width:143px" %)All|(% style="width:1729px" %)(((
345 1) If the action is set to “replace” then the entire contents of the existing maintainable object in the Registry MUST be replaced by the object submitted, unless the final attribute is set to “true” in which case the only changes that are allowed are to the following constructs:
346
347 * Name – this applies to the Maintainable object and its contained elements, such a Code in a Code list.
348 * Description - this applies to the Maintainable object and its contained elements, such a Code in a Code list.
349 * Annotation - this applies to the Maintainable object and its contained elements, such a Code in a Code list.
350 * validTo
351 * validFrom
352 * structureURL
353 * serviceURL
354 * uri
355 * isExternalReference
356
357 2) Cross referenced structures MUST exist in either the submitted document (in Structures or Structure Location) or in the registry to which the request is submitted.
358
359 3) If the action is set to “delete” then the Registry MUST verify that the object can deleted. In order to qualify for deletion the object must:
360
361 а) Not have the final attribute set to “true”
362 b) Not be referenced from any other object in the Registry.
363
364 4) The version rules in the SDMX Schema documentation MUST be obeyed.
365
366 5) The specific rules for the elements and attributes documented in the SDMX Schema MUST be obeyed.
367 )))
368 |(% style="width:143px" %)SubmitStructureRequest|(% style="width:1729px" %)Structures are submitted at the level of the Maintainable Artefact and the behaviour in “All” above is therefore at the level of the Maintainable Artefact.
369 |(% style="width:143px" %)SubmitProvisioningRequest|(% style="width:1729px" %)No additional behaviour.
370 |(% style="width:143px" %)Submit Registration Request|(% style="width:1729px" %)(((
371 If the datasource is a file (simple datasource) then the file MAY be retrieved and indexed according to the Boolean attributes set in the Registration.
372
373 For a queryable datasource the Registry MAY validate that the source exists and can accept an SDMX-ML data query.
374 )))
375
376 = 6 Identification of SDMX Objects =
377
378 == 6.1 Identification, Versioning, and Maintenance ==
379
380 All major classes of the SDMX Information model inherit from one of:
381
382 * **IdentifiableArtefact** - this gives an object the ability to be uniquely identified (see following section on identification), to have a user-defined URI, and to have multi-lingual annotations.
383 * **NamableArtefact **- this has all of the features of IdentifiableArtefact plus the ability to have a multi-lingual name and description,
384 * **VersionableArtefact **– this has all of the above features plus a version number and a validity period.
385 * **MaintainableArtefact** – this has all of the above features, and indication as to whether the object is “final” and cannot be changed or deleted, registry and structure URIs, plus an association to the maintenance agency of the object.
386
387 === 6.1.1 Identification, Naming, Versioning, and Maintenance Model ===
388
389 [[image:1747824504225-229.png]]
390
391 **Figure 5: Class diagram of fundamental artefacts in the SDMX-IM**
392
393 The table below shows the identification and related data attributes to be stored in a registry for objects that are one of:
394
395 * Annotable
396 * Identifiable
397 * Nameable
398 * Versionable
399 * Maintainable
400
401 (% style="width:935.294px" %)
402 |**Object Type**|(% style="width:244px" %)**Data Attributes**|(% style="width:99px" %)**Status**|**Data type**|(% style="width:389px" %)**Notes**
403 |Annotable|(% style="width:244px" %)AnnotationTitle|(% style="width:99px" %)C|string|(% style="width:389px" %)
404 | |(% style="width:244px" %)AnnotationType|(% style="width:99px" %)C|string|(% style="width:389px" %)
405 | |(% style="width:244px" %)AnnotationURN|(% style="width:99px" %)C|string|(% style="width:389px" %)
406 | |(% style="width:244px" %)(((
407 AnnotationText in the form of International String
408 )))|(% style="width:99px" %)C| |(% style="width:389px" %)This can have languagespecific variants.
409 |Identifiable|(% style="width:244px" %)all content as for Annotable plus|(% style="width:99px" %) | |(% style="width:389px" %)
410 | |(% style="width:244px" %)id|(% style="width:99px" %)M|string|(% style="width:389px" %)
411 | |(% style="width:244px" %)uri|(% style="width:99px" %)C|string|(% style="width:389px" %)
412 | |(% style="width:244px" %)urn|(% style="width:99px" %)C|string|(% style="width:389px" %)Although the urn is computable and therefore may not be submitted or stored physically, the Registry must return the urn for each object, and must be able to service a query on an object referenced solely by its urn.
413 |Nameable|(% style="width:244px" %)all content as for Identifiable plus|(% style="width:99px" %) | |(% style="width:389px" %)
414 | |(% style="width:244px" %)Name in the form of International String|(% style="width:99px" %)M|string|(% style="width:389px" %)This can have languagespecific variants.
415 | |(% style="width:244px" %)(((
416 Description in the form of International String
417 )))|(% style="width:99px" %)C|string|(% style="width:389px" %)This can have languagespecific variants.
418 |Versionable|(% style="width:244px" %)All content as for Identifiable plus|(% style="width:99px" %) | |(% style="width:389px" %)
419 | |(% style="width:244px" %)version|(% style="width:99px" %)C|string|(% style="width:389px" %)This is the version number. If not present the default is 1.0
420 | |(% style="width:244px" %)validFrom|(% style="width:99px" %)C|Date/time|(% style="width:389px" %)
421 | |(% style="width:244px" %)validTo|(% style="width:99px" %)C|Date/time|(% style="width:389px" %)
422 |Maintainable|(% style="width:244px" %)All content as for Versionable plus|(% style="width:99px" %) | |(% style="width:389px" %)
423 | |(% style="width:244px" %)final|(% style="width:99px" %) |boolean|(% style="width:389px" %)Value of “true” indicates that this is a final specification and it cannot be changed except as a new version. Note that providing a “final’ object is not referenced from another object then it may be deleted.
424 | |(% style="width:244px" %)isExternalReference|(% style="width:99px" %)C|boolean|(% style="width:389px" %)Value of “true” indicates that the actual resource is held outside of this registry. The actual reference is given in the registry URI or the structureURI, each of which must return a valid SDMX-ML file.
425 | |(% style="width:244px" %)serviceURL|(% style="width:99px" %)C|string|(% style="width:389px" %)The url of the service that can be queried for this resource
426 | |(% style="width:244px" %)structureURL|(% style="width:99px" %)C|string|(% style="width:389px" %)The url of the resource.
427 | |(% style="width:244px" %)(Maintenance) agencyId|(% style="width:99px" %)M|string|(% style="width:389px" %)The object must be linked to a maintenance agency.
428
429 **Table 1: Common Attributes of Object Types**
430
431 == 6.2 Unique identification of SDMX objects ==
432
433 === 6.2.1 Agencies ===
434
435 The Maintenance Agency in SDMX is maintained in an Agency Scheme which itself is a sub class of Organisation Scheme – this is shown in the class diagram below.
436
437 **Figure 6: Agency Scheme Model**
438
439 The Agency in SDMX is extremely important. The Agency Id system used in SDMX is an n-level structure. The top level of this structure is maintained by SDMX. Any Agency in this top level can declare sub agencies and any sub agency can also declare sub agencies. The Agency Scheme has a fixed id and version and is never declared explicitly in the SDMX object identification mechanism.
440
441 In order to achieve this SDMX adopts the following rules:
442
443 1. Agencies are maintained in an Agency Scheme (which is a sub class of Organisation Scheme)
444 1. The agency of the Agency Scheme must also be declared in a (different) Agency Scheme.
445 1. The “top-level” agency is SDMX and maintains the “top-level” Agency Scheme.
446 1. Agencies registered in the top-level scheme can themselves maintain a single Agency Scheme. Agencies in these second-tier schemes can themselves maintain a single Agency Scheme and so on.
447 1. The AgencyScheme cannot be versioned and so take a default version number of 1.0 and cannot be made “final”.
448 1. There can be only one AgencyScheme maintained by any one Agency. It has a fixed Id of AGENCIES.
449 1. The /hierarchy of Organisation is not inherited by Maintenance Agency – thus each Agency Scheme is a flat list of Maintenance Agencies.
450 1. The format of the agency identifier is agencyID.agencyID etc. The toplevel agency in this identification mechanism is the agency registered in the SDMX agency scheme. In other words, SDMX is not a part of the hierarchical ID structure for agencies. However SDMX is, itself, a maintenance agency and is contained in the top-level Agency Scheme.
451
452 This supports a hierarchical structure of agencyID.
453
454 An example is shown below.
455
456 [[image:1747824123012-527.jpeg]]
457
458 ==== Figure 7: Example of Hierarchic Structure of Agencies ====
459
460 The following organizations maintain an Agency Scheme.
461
462 * SDMX – contains Agencies AA, BB
463 * AA – contains Agencies CC, DD
464 * BB – contains Agencies CC, DD
465 * DD – Contains Agency EE
466
467 Each agency is identified by its full hierarchy excluding SDMX.
468
469 e.g. the id of EE as an agencyID is AA.DD.EE
470
471 An example of this is shown in the XML snippet below.
472
473 [[image:1747824123013-196.jpeg||height="309" width="446"]]
474
475 (% class="wikigeneratedid" id="HFigure8:ExampleShowingUseofAgencyIdentifiers" %)
476 **Figure 8: Example Showing Use of Agency Identifiers**
477
478 Each of these maintenance agencies has an identical Code list with the Id CL_BOP. However, each is uniquely identified by means of the hierarchic agency structure.
479
480 === 6.2.2 Universal Resource Name (URN) ===
481
482 ==== 6.2.2.1 Introduction ====
483
484 To provide interoperability between SDMX Registry/Repositories in a distributed network environment, it is important to have a scheme for uniquely identifying (and thus accessing) all first-class (Identifiable) SDMX-IM objects. Most of these unique identifiers are composite (containing maintenance agency, or parent object identifiers), and there is a need to be able to construct a unique reference as a single string. This is achieved by having a globally unique identifier called a universal resource name (URN) which is generated from the actual identification components in the SDMX-RR APIs. In other words, the URN for any Identifiable Artefact is constructed from its component identifiers (agency, Id, version etc.).
485
486 ==== 6.2.2.2 URN Structure ====
487
488 ===== //Case Rules for URN// =====
489
490 For the URN, all parts of the string are case sensitive. The Id of any object must be UPPER CASE. Therefore, CRED_ext_Debt is invalid and it should be CRED_EXT_DEBT.
491
492 The generic structure of the URN is as follows:
493
494 SDMXprefix.SDMX-IM-package-name.class-name=agencyid:maintainedobject-id(maintainedobject-version).*containerobject-id.object-id
495
496 ~* this can repeat and may not be present (see explanation below)
497
498 Note that in the SDMX Information Model there are no concrete Versionable Artefacts that are not a Maintainable Artefact. For this reason the only version information that is allowed is for the maintainable object.
499
500 The Maintenance agency identifier is separated from the maintainable artefact identifier by a colon ‘:’. All other identifiers in the SDMX URN syntax are separated by a period(.).
501
502 ==== 6.2.2.3 Explanation of the generic structure ====
503
504 In the explanation below the actual object that is the target of the URN is called the **//actual object//**.
505
506 **SDMXPrefix:** urn:sdmx:org.                                     
507
508 **SDMX-IM package name:** sdmx.infomodel.package=
509
510 [[image:1747824123016-678.png]]
511
512 **maintainable-object-id** is the identifier of the maintainable object. This will always be present as all identifiable objects are either a maintainable object or contained in a maintainable object.
513
514 **(maintainable-object-version)** is the version of the maintainable object and is enclosed in round brackets (). It will always be present.
515
516 **container-object-id** is the identifier of an intermediary object that contains the actual object which the URN is identifying. It is not mandatory as many actual objects do not have an intermediary container object. For instance, a Code is in a maintained object (Code List) and has no intermediary container object, whereas a Metadata Attribute has an intermediary container object (Report Structure) and may have an intermediary container object which is its parent Metadata Attribute. For this reason the container object id may repeat, with each repetition identifying the object at the next-lower level in its hierarchy. Note that if there is only a single containing object in the model then it is NOT included in the URN structure. This applies to Attribute Descriptor, Dimension Descriptor, and Measure Descriptor where there can be only one such object and this object has a fixed id. Therefore, whilst each of these has a
517
518 URN, the id of the Attribute Descriptor, Dimension Descriptor, and Measure Descriptor is not included when the actual object is a Data Attribute or a Dimension/Measure Dimension/ Time Dimension, or a Measure.
519
520 Note that although a Code can have a parent Code and a Concept can have a parent Concept these are maintained in a flat structure and therefore do not have a container-object-id.
521
522 For example the sequence is agency:DSDid(version).DimensionId and not agency:DSDid(version).DimensionDescriptorId.DimensionId.
523
524 **object-id** is the identifier of the actual object unless the actual object is a maintainable object. If present it is always the last id and is not followed by any other character.
525
526 ===== //Generic Examples of the URN Structure// =====
527
528
529 Actual object is a maintainable
530
531 SDMXPrefix.SDMX-IM package name.classname=agency id:maintained-object-id(version)
532
533 Actual object is contained in a maintained object with no intermediate containing object
534
535 SDMXPrefix.SDMX-IM package name.classname=agency id:maintained-object-id(version).object-id
536
537 Actual object is contained in a maintained object with an intermediate containing object
538
539 SDMXPrefix.SDMX-IM package name.classname=agency
540
541 id:maintained-object-id(version).contained-object-id.object-id
542
543 Actual object is contained in a maintained object with no intermediate containing object but the object type itself is hierarchical
544
545 In this case the object id may not be unique in itself but only within the context of the hierarchy. In the general syntax of the URN all intermediary objects in the structure (with the exception, of course, of the maintained object) are shown as a contained object. An example here would be a Category in a Category Scheme. The Category is hierarchical and all intermediate Categories are shown as a contained object. The example below shows the generic structure for Category Scheme/Category/Category
546
547 SDMXPrefix.SDMX-IM package name.classname=agency id:maintained-object-id(version).contained-object-id.object-id
548
549 Actual object is contained in a maintained object with an intermediate containing object and the object type itself is hierarchical
550
551 In this case the generic syntax is the same as for the example above as the parent object is regarded as a containing object, even if it is of the same type. An example here is a Metadata Attribute where the contained objects are Report Structure (first contained object id) and Metadata Attribute (subsequent contained object Ids). The example below shows the generic structure for MSD/Report Structure/Metadata Attribute/Metadata Attribute
552
553 SDMXPrefix.SDMX-IM package name.classname=agency id:maintained-object-id(version).contained-object-id. contained-object-id contained-object-id.object-id
554
555 ===== //Concrete Examples of the URN Structure// =====
556
557 The Data Structure Definition CRED_EXT_DEBT version 1.0 maintained by the top level Agency TFFS would have the URN:
558
559 urn:sdmx:org.sdmx.infomodel.datastructure.DataStucture=TFFS:CRED_EXT_ DEBT(1.0)
560
561 The URN for a code for Argentina maintained by ISO in the code list CL_3166A2 version 1.0 would be:
562
563 urn:sdmx:org.sdmx.infomodel.codelist.Code=ISO:CL_3166A2(1.0).AR
564
565 The URN for a category (id of 1) which has parent category (id of 2) maintained by SDMX in the category scheme SUBJECT_MATTER_DOMAINS version 1.0 would be:
566
567 urn:sdmx:org.sdmx.infomodel.categoryscheme.Category=SDMX:SUBJE CT_MATTER_DOMAINS(1.0).1.2
568
569 The URN for a Metadata Attribute maintained by SDMX in the MSD CONTACT_METADATA version 1.0 in the Report Structure CONTACT_REPORT where the hierarchy of the Metadata Attribute is
570
571 CONTACT_DETAILS/CONTACT_NAME would be:
572
573 urn:sdmx:org.sdmx.infomodel.metadatastructure.MetadataAttribut e=SDMX:CONTACT_METADATA(1.0).CONTACT_REPORT.CONTACT_DETAILS.CO NTACT_NAME
574
575 The TFFS defines ABC as a sub Agency of TFFS then the URN of a Dataflow maintained by ABC and identified as EXTERNAL_DEBT version 1.0 would be:
576
577 urn:sdmx:org.sdmx.infomodel.datastructure.Dataflow=TFFS.ABC:EX
578
579 TERNAL_DEBT(1.0)
580
581 The SDMX-RR MUST support this globally unique identification scheme. The SDMXRR MUST be able to create the URN from the individual identification attributes submitted and to transform the URN to these identification attributes. The identification attributes are:
582
583 * **Identifiable and Nameable Artefacts**: id (in some cases this id may be hierarchic)
584 * **Maintainable Artefacts**: id, version, agencyId,
585
586 The SDMX-RR MUST be able to resolve the unique identifier of an SDMX artefact and to produce an SDMX-ML rendering of that artefact if it is located in the Registry.
587
588 === 6.2.3 Table of SDMX-IM Packages and Classes ===
589
590 The table below lists all of the packages in the SDMX-IM together with the concrete classes that are in these packages and whose objects have a URN.
591
592 |**Package**|(((
593 **URN Classname (model classname**
594
595 **where this is different)**
596 )))
597 |base|Agency
598 | |OrganisationUnitScheme
599 | |AgencyScheme
600 | |DataProviderScheme
601 | |DataConsumerScheme
602 | |OrganisationUnit
603 | |DataProvider
604 | |DataConsumer
605 | |
606 |datastructure|DataStructure (DataStructureDefinition)
607 | |AttributeDescriptor
608 | |DataAttribute
609 | |GroupDimensionDescriptor
610 | |DimensionDescriptor
611 | |Dimension
612 | |MeasureDimension
613 | |TimeDimension
614 | |MeasureDescriptor
615 | |PrimaryMeasure
616 | |Dataflow (DataflowDefinition)
617 | |
618 |metadatastructure|MetadataTarget
619 | |DimensionDescriptorValueTarget
620 | |IdentifiableObjectTarget
621 | |ReportPeriodTarget
622 | |DataSetTarget
623 | |ReportStructure
624 | |MetadataAttribute
625 | |(((
626 MetadataStructure
627
628 (MetadataStructureDefinition)
629 )))
630 | |Metadataflow (MetadataflowDefinition)
631 | |
632 |process|Process
633 | |ProcessStep
634 | |Transition
635 | |
636 |registry|ProvisionAgreement
637 | |AttachmentConstraint
638 | |ContentConstraint
639 | |Subscription
640 | |
641 |mapping|StructureMap
642 | |StructureSet
643 | |ComponentMap
644 |**Package**|(((
645 **URN Classname (model classname**
646
647 **where this is different)**
648 )))
649 | |ConceptSchemeMap
650 | |OrganisationSchemeMap
651 | |CodelistMap
652 | |CategorySchemeMap
653 | |ReportingTaxonomyMap
654 | |ConceptMap
655 | |OrganisationMap
656 | |CodeMap
657 | |HybridCodelistMap
658 | |CategoryMap
659 | |HybridCodeMap
660 | |ReportingCategoryMap
661 | |
662 |codelist|Codelist
663 | |HierarchicalCodelist
664 | |Hierarchy
665 | |Hierarchy
666 | |Code
667 | |HierarchicalCode
668 | |Level
669 | |
670 |categoryscheme|CategoryScheme
671 | |Category
672 | |Categorisation
673 | |ReportingTaxonomy
674 | |ReportingCategory
675 | |
676 |conceptscheme|ConceptScheme
677 | |Concept
678 | |
679 |transformation|TransformationScheme
680 | |Transformation
681 | |CustomTypeScheme
682 | |CustomType
683 | |NamePersonalisationScheme
684 | |NamePersonalisation
685 | |VtlCodelistMapping
686 | |VtlConceptMapping
687 | |VtlDataflowMapping
688 | |VtlConceptSchemeMapping
689 | |RulesetScheme
690 | |Ruleset
691 | |UserDefinedOperatorScheme
692 | |UserDefinedOperator
693 | |
694
695 **Table 2: SDMX-IM Packages and Contained Classes**
696
697
698 === 6.2.4 URN Identification components of SDMX objects ===
699
700 The table below describes the identification components for all SDMX object types that have identification. Note the actual attributes are all Id, but have been prefixed by their class name or multiple class names to show navigation, e.g. conceptSchemeAgencyId is really the Id attribute of the Agency class that is associated to the ConceptScheme.
701
702 ~* indicates that the object is maintainable.
703
704 Note that for brevity the URN examples omit the prefix. All URNs have the prefix
705
706 urn:sdmx.org.sdmx.infomodel.{package}.{classname}=
707
708
709 |**SDMX Class**|**Key attribute(s)**|**Example of URN**
710 |Agency|The URN for an Agency is shown later in this table. The identification of an Agency in the URN structure for the maintainable object is by means of the agencyId. The AgencyScheme is not identified as SDMX has a mechanism for identifying an Agency uniquely by its Id. Note that this Id may be hierarchical.|(((
711 IMF
712
713
714 Sub agency in the IMF AGENCIES
715
716
717 IMF.SubAgency1
718 )))
719 |*ConceptScheme|conceptSchemeAgencyId:conceptSchemeId(ve rsion)|SDMX:CROSS_DOMAIN_CONCEPTS(1.0)
720 |Concept|(((
721 conceptSchemeAgencyId:
722
723 conceptSchemeId(version).conceptId
724 )))|SDMX:CROSS_DOMAIN_CONCEPTS(1.0).FREQ
725 |*Codelist|codeListAgencyId:codeListId(version)|SDMX:CL_FREQ(1.0)
726 |Code|codeListAgencyId:codelistId(version).codeId|(((
727 SDMX:CL_FREQ(1.0).Q
728
729
730 )))
731
732
733
734 |(((
735 *Hierarchical
736
737 Codelist
738 )))|hierachicalCodelistAgencyId: hierarchicalCodelistId(version)|(((
739 UNESCO:CL_EXP_SOURCE(1.0)
740
741
742 )))
743 |Hierarchy|(((
744 hierachicalcodeListAgencyId:
745
746 hierarchicalcodelistId(version).Hierarchy
747 )))|UNESCO:CL_EXP_SOURCE(1.0). H-C-GOV
748 |Level|(((
749 hierachicalcodeListAgencyId:
750
751 hierarchicalcodelistId(version).Hierarchy.Level
752 )))|(((
753 ESTAT:HCL_REGION(1.0).H_1.COUNTRY
754
755
756 )))
757 |HierarchicalCode|hierachicalCodeListAgencyId: hierarchicalcodelistId(version).hierarchy.hierarc hicalCode|UNESCO:CL_EXP_SOURCE(1.0). H-C-GOV.GOV_CODE1
758 |*DataStructure|dataStructureDefintitionAgencyId: dataStructureDefintitionId(version)|TFFS:EXT_DEBT(1.0)
759 |(((
760 Dimension
761
762 Descriptor
763
764 Measure
765
766 Descriptor
767
768 Attribute
769
770 Descriptor
771 )))|(((
772 dataStructureDefinitionAgencyId: dataStructureDefinitionId(version).
773
774 componentListId
775
776 where the componentListId is the name of the class (there is only one occurrence of each in the Data Structure Definition)
777 )))|(((
778 TFFS:EXT_DEBT(1.0).DimensionDescriptor
779
780 TFFS:EXT_DEBT(1.0).MeasureDescriptor
781
782 TFFS:EXT_DEBT(1.0).AttributeDescriptor
783 )))
784 |(((
785 GroupDimension
786
787 Descriptor
788 )))|(((
789 dataStructureDefinitionAgencyId: dataStructureDefinitionId(version).
790
791 groupDimensionDescriptorId
792 )))|TFFS:EXT_DEBT(1.0).SIBLING
793 |Dimension|(((
794 dataStructureDefinitionAgencyId: dataStructureDefinition (version).
795
796 dimensionId
797 )))|TFFS:EXT_DEBT(1.0).FREQ
798 |TimeDimension|(((
799 dataStructureDefinitionAgencyId: dataStructureDefinition (version).
800
801 timeDimensionId
802 )))|TFFS:EXT_DEBT(1.0).TIME_PERIOD
803 |Measure Dimension|dataStructureDefinitionAgencyId: dataStructureDefinition (version).|TFFS:EXT_DEBT(1.0).STOCK_FLOW
804
805
806
807 | |measureDimensionId|
808 |DataAttrribute|dataStructureDefinitionAgencyId: dataStructureDefinition (version). dataAttributeId|TFFS:EXT_DEBT(1.0).OBS_STATUS
809 |PrimaryMeasure|(((
810 dataStructureDefinitionAgencyId: dataStructureDefinition (version).
811
812 primaryMeasureId
813 )))|TFFS:EXT_DEBT(1.0).OBS_VALUE
814 |(((
815 *Category
816
817 Scheme
818 )))|categorySchemeAgencyId: categorySchemeId(version)|IMF:SDDS(1.0)
819 |Category|categorySchemeAgencyId: categorySchemeId(version). categoryId.categoryId categoryId.categoryId etc.|(((
820 IMF:SDDS(1.0):
821
822 level_1_category.level_2_category …
823 )))
824 |(((
825 *Reporting
826
827 Taxonomy
828 )))|reportingTaxonomyAgencyId: reportingTaxonomyId(version)| IMF:REP_1(1.0)
829 |ReportingCategory|reportingTaxonomyAgencyId: reportingTaxonomyId(version) reportingcategoryId.reportingcategoryId|(((
830 IMF:REP_1(1.0):
831
832 level_1_repcategory.level_2_repcategory …
833 )))
834 |*Categorisation|categorisationAgencyId: categorisationId(version)|IMF:cat001(1.0)
835 |(((
836 *Organisation
837
838 Unit Scheme
839 )))|organisationUnitSchemeAgencyId: organisationUnitSchemeId(version)|ECB:ORGANISATIONS(1.0)
840 |Organisation Unit|organisationUnitSchemeAgencyId: organisationUnitSchemeId(version). organisationUnitId|ECB:ORGANISATIONS(1.0).1F
841 |*AgencyScheme|agencySchemeAgencyId: agencySchemeId(version)|ECB:AGENCIES(1.0)
842
843
844
845 |Agency|agencySchemeAgencyId: agencySchemeId(version). agencyId|ECB:AGENCY(1.0).AA
846 |(((
847 *DataProvider
848
849 Scheme
850 )))|dataProviderSchemeAgencyId: dataProviderSchemeId(version)|SDMX:DATA_PROVIDERS(1.0)
851 |DataProvider|dataProviderSchemeAgencyId: dataProviderSchemeId(version) dataProviderId|SDMX:DATA_PROVIDERS(1.0).PROVIDER_1
852 |(((
853 *DataConsumer
854
855 Scheme
856 )))|dataConsumerSchemeAgencyId: dataConsumerSchemeId(version)|SDMX:DATA_CONSUMERS(1.0)
857 |Data Consumer|dataConsumerSchemeAgencyId: dataConsumerSchemeId(version) dataConsumerId|SDMX:DATA_CONSUMERS(1.0).CONSUMER_1
858 |(((
859 *Metadata
860
861 Structure
862 )))|MSDAgencyId:MSDId(version)|IMF:SDDS_MSD(1.0)
863 |MetadataTarget|(((
864 MSDAgencyId:
865
866 MSDId(version).metadataTargetId
867 )))|IMF:SDDS_MSD(1.0).AGENCY
868 |(((
869 Dimension
870
871 DescriptorValues
872
873 Target
874 )))|(((
875 MSDAgencyId: MSDId(version).
876
877 metadataTargetId.keyDescriptorValueTargetId
878 )))|IMF:SDDS_MSD(1.0).AGENCY.KEY
879 |Identifiable ObjectTarget|(((
880 MSDAgencyId:
881
882 MSDId(version).metadataTargetId.identifiable
883
884 ObjectTargetId
885 )))|IMF:SDDS_MSD(1.0).AGENCY.STR-OBJECT
886 |DataSetTarget|(((
887 MSDAgencyId:
888
889 MSDId(version).metadataTargetId.dataSet
890
891 TargetId
892 )))|IMF:SDDS_MSD(1.0).AGENCY.D1101
893 |PeportPeriod Target|(((
894 MSDAgencyId:
895
896 MSDId(version).metadataTargetId.reportPeriod
897
898 TargetId
899 )))|IMF:SDDS_MSD(1.0).AGENCY.REP_PER
900
901
902
903 |(((
904 ReportStructure
905
906
907 )))|(((
908 MSDAgencyId:
909
910 MSDId(version).reportStructureId
911 )))|IMF:SDDS_MSD(1.0).AGENCY_REPORT
912 |(((
913 Metadata
914
915 Attribute
916 )))|(((
917 MSDAgencyId:
918
919 MSDId(version).reportStructureId.metadataattri buteID
920 )))|IMF:SDDS_MSD(1.0).AGENCY_REPORT.COMPILATION
921 |*Dataflow|dataflowAgencyId: dataflowId(version)|TFFS:CRED_EXT_DEBT(1.0)
922 |*Provision Agreement|(((
923 provisionAgreementAgencyId:provisionAgreem entId(version)
924
925
926 )))|(((
927 TFFS:CRED_EXT_DEBT_AB(1.0)
928
929
930
931 )))
932 |(((
933 *Content
934
935 Constraint
936 )))|constraintAgencyId:ContentConstraintId(versio n)|TFFS:CREDITOR_DATA_CONTENT(1.0)
937 |(((
938 *Attachment
939
940 Constraint
941 )))|(((
942 constraintAgencyId:
943
944 attachmentConstraintId(version)
945 )))|TFFS:CREDITOR_DATA_ATTACHMENT_CONSTRAINT_ONE(1.0)
946 |*Metadataflow|metadataflowAgencyId: metadataflowId(version)|IMF:SDDS_FLOW(1.0)
947 |*StructureSet|structureSetAgencyId: structureSetId(version)|SDMX:BOP_STRUCTURES(1.0)
948 |StructureMap|structureSetAgencyId: structureSetId(version). structureMapId|SDMX:BOP_STRUCTURES(1.0).TABLE1_TABLE2
949 |Component Map|(((
950 structureSetAgencyId: structureSetId(version).
951
952 structureMapId. componentMapId
953 )))|SDMX:BOP_STRUCTURES(1.0).TABLE1_TABLE2. REFAREA_REPCOUNTRY
954 |CodelistMap|structureSetAgencyId: structureSetId(version). codelistMapId|SDMX:BOP_STRUCTURES(1.0).CLREFAREA_CLREPCOUNTRY
955 |CodeMap|structureSetAgencyId: structureSetId(version).|SDMX:BOP_STRUCTURES(1.0).CLREFAREA_CLREPCOUNTRY. DE_GER
956
957
958
959 | |(((
960 codeListMapId.
961
962 codeMapId
963 )))|
964 |(((
965 Category
966
967 SchemeMap
968 )))|structureSetAgencyId: structureSetId(version). categorySchemeMapId|SDMX:BOP_STRUCTURES(1.0).SDMX_EUROSTAT
969 |CategoryMap|structureSetAgencyId: structureSetId(version). categorySchemeMapId. categoryMapId|SDMX:BOP_STRUCTURES(1.0).SDMX_EUROSTAT.TOURISM_M AP
970 |Organisation SchemeMap|structureSetAgencyId: structureSetId(version). organisationSchemeMapId|SDMX:BOP_STRUCTURES(1.0).DATA_PROVIDER_MAP
971 |Organisation Map|structureSetAgencyId: structureSetId(version). organisationSchemeMapId. organisationMapId|SDMX:BOP_STRUCTURES(1.0).DATA_PROVIDER_MAP.IMF_1C0
972 |(((
973 Concept
974
975 SchemeMap
976 )))|structureSetAgencyId: structureSetId(version). conceptSchemeMapId|SDMX:BOP_STRUCTURES(1.0).SDMX_OECD
977 |ConceptMap|(((
978 structureSetAgencyId: structureSetId(version). conceptSchemeMapId.
979
980 conceptMapId
981
982
983 )))|SDMX:BOP_STRUCTURES(1.0).SDMX_OECD.COVERAGE_AVAI LABILITY
984 |(((
985 Reporting
986
987 TaxonomyMap
988 )))|structureSetAgencyId: structureSetId(version). reportingTaxonomyMapId|SDMX:BOP_STRUCTURES(1.0).TAXMAP
989 |(((
990 Reporting
991
992 CategoryMap
993 )))|(((
994 structureSetAgencyId: structureSetId(version).
995
996 reportngCategoryId
997 )))|SDMX:BOP_STRUCTURES(1.0).TAXMAP.TOPCAT
998
999
1000
1001 |(((
1002 HybridCodelist
1003
1004 Map
1005 )))|structureSetAgencyId: structureSetId(version). hybridCodelistMapId.|SDMX:BOP_STRUCTURES(1.0).COUNTRY_HIERARCHYMAP
1006 |HybridCodeMap|structureSetAgencyId: structureSetId(version). hybridCodelistMapId. hybridCodeMapId|SDMX:BOP_STRUCTURES(1.0).COUNTRY_HIERARCHYMAP.CO DEMAP1
1007 |*Process|processAgencyId: processId{version]|BIS:PROCESS1(1.0)
1008 |ProcessStep|(((
1009 processAgencyId: processId(version).
1010
1011 processStepId
1012 )))|BIS:PROCESS1(1.0).STEP1
1013 |Transition|(((
1014 processAgencyId: processId(version).
1015
1016 processStepId transitionId
1017 )))|BIS:PROCESS1(1.0).STEP1.TRANSITION1
1018 |Subscription|The Subscription is not itself an Identifiable Artefact and therefore it does not follow the rules for URN structure, The name of the URN is registryURN There is no pre-determined format.|This cannot be generated by a common mechanism as subscriptions, although maintainable in the sense that they can be submitted and deleted, are not mandated to be created by a maintenance agency, and have no versioning mechanism. It is therefore the responsibility of the target registry to generate a unique Id for the Subscription, and for the application creating the subscription to store the registryURN that is returned from the registry in the subscription response message.
1019 |(((
1020 *Transformation
1021
1022 Scheme
1023 )))|transformationSchemeAgencyId transformationSchemeId(version)|ECB: TRANSFORMATION_SCHEME(1.0)
1024 |Transformation|(((
1025 transformationSchemeAgencyId transformationSchemeId(version)
1026
1027 transformationId
1028 )))|ECB:TRANSFORMATION_SCHEME(1.0).TRANS_1
1029 |CustomType Scheme|customTypeSchemeAgencyId customTypeSchemeId(version)|ECB:CUSTOM_TYPE_SCHEME(1.0)
1030
1031
1032
1033 |CustomType|customTypeSchemeAgencyId customTypeSchemeId(version) customTypeId|ECB: CUSTOM_TYPE_SCHEME(1.0).CUSTOM_TYPE_1
1034 |(((
1035 Name
1036
1037 Personalisation
1038
1039 Scheme
1040 )))|namePersonalisationSchemeAgencyId namePersonalisationSchemeId(version)|ECB:PSN_SCHEME(1.0)
1041 |(((
1042 Name
1043
1044 Personalisation
1045 )))|namePersonalisationSchemeAgencyId namePersonalisationSchemeId(version) namePersonalisationId|ECB:PSN_SCHEME(1.0).PSN1234
1046 |VtlMapping Scheme|vtlMappingSchemeAgencyId VtlMappingSchemeId(version)|ECB:CLIST_MP(2.0)
1047 |VtlCodelist Mapping|vtlMappingSchemeAgencyId vtlMappingSchemeId(version) vtlCodelistMappingId|ECB:CLIST_MP(2.0).ABZ
1048 |VtlConcept Mapping|vtlMappingSchemeAgencyId vtlMappingSchemeId(version) vtlConceptMappingId|ECB:CLIST_MP(1.0).XYA
1049 |VtlDataflow Mapping|vtlMappingSchemeAgencyId vtlMappingSchemeId(version) vtlDataflowMappingId|ECB:CLIST_MP(1.0).MOQ
1050 |(((
1051 VtlConcept
1052
1053 SchemeMapping
1054 )))|vtlMappingSchemeAgencyId vtlMappingSchemeId(version) vtlConceptSchemeId|ECB:CLIST_MP(1.0).Z11
1055 |RulesetScheme|rulesetSchemeAgencyId rulesetSchemeId(version)|ECB:RULESET_23(1.0)
1056 |Ruleset|rulesetSchemeAgencyId rulesetSchemeId(version) rulesetId|ECB:RULESET_23(1.0).SET111
1057 |(((
1058 UserDefined
1059
1060 OperatorScheme
1061 )))|userDefinedOperatorSchemeAgencyId userDefinedOperatorSchemeId(version)|ECB:OS_CALC(1.2)
1062 |UserDefined Operator|userDefinedOperatorSchemeAgencyId userDefinedOperatorSchemeId(version) usserDefinedOperatorId|ECB:OS_CALC(1.2).OS267
1063
1064 7**Table 3: Table of identification components for SDMX Identifiable Artefacts**
1065
1066
1067 = 7 Implementation Notes =
1068
1069 == 7.1 Structural Definition Metadata ==
1070
1071 === 7.1.1 Introduction ===
1072
1073 The SDMX Registry must have the ability to support agencies in their role of defining and disseminating structural metadata artefacts. These artefacts include data structure definitions, code lists, concepts etc. and are fully defined in the SDMX-IM. An authenticated agency may submit valid structural metadata definitions which must be stored in the registry. Note that the term “structural metadata” refers as a general term to all structural components (Data structure Definitions, Metadata Structure Definitions, Code lists, Concept Schemes, etc.)
1074
1075 At a minimum, structural metadata definitions may be submitted to and queried from the registry via an HTTP/HTTPS POST in the form of one of the SDMX-ML registry messages for structural metadata and the SDMX Query message for structure queries. The use of SOAP is also recommended, as described in the SDMX Web Services Guidelines. The message may contain all structural metadata items for the whole registry, structural metadata items for one maintenance agency, or individual structural metadata items.
1076
1077 Structural metadata items
1078
1079 * may only be modified by the maintenance agency which created them
1080 * may only be deleted by the agency which created them
1081 * may not be deleted if they are referenced from other constructs in the Registry
1082
1083 The level of granularity for the maintenance of SDMX Structural Metadata objects in the registry is the Maintainable Artefact. In other words, any function such as add, modify, delete is at the level of the Maintainable Artefact. For instance, if a Code is added to a Code List, or the Name of a Code is changed, the Registry must replace the existing Code List with the submitted Code List of the same Maintenance Agency, Code List, Id and Version.
1084
1085 The following table lists the Maintainable Artefacts.
1086
1087 |(% colspan="4" %)**Maintainable Artefacts**|(% colspan="2" %)**Content**|
1088 |(% colspan="2" %)**Abstract Class**|(% colspan="2" %)**Concrete Class**|(% colspan="2" %) |
1089 |(% colspan="2" %)Item Scheme|(% colspan="2" %)Codelist|(% colspan="2" %)Code|
1090 |(% colspan="2" %) |(% colspan="2" %)Concept Scheme|(% colspan="2" %)Concept|
1091 |(% colspan="2" %) |(% colspan="2" %)Category Scheme|(% colspan="2" %)Category|
1092 |(% colspan="2" %) |(% colspan="2" %)Organisation Unit Scheme|(% colspan="2" %)Organisation Unit|
1093 |(% colspan="2" %) |(% colspan="2" %)Agency Scheme|(% colspan="2" %)Agency|
1094 |(% colspan="2" %) |(% colspan="2" %)Data Provider Scheme|(% colspan="2" %)Data Provider|
1095 |(% colspan="2" %) |(% colspan="2" %)Data Consumer Scheme|(% colspan="2" %)Data Consumer|
1096 |(% colspan="2" %) |(% colspan="2" %)Reporting Taxonomy|(% colspan="2" %)Reporting Category|
1097 |(% colspan="2" %) |(% colspan="2" %)Transformation Scheme|(% colspan="2" %)Transformation|
1098 |(% colspan="2" %) |(% colspan="2" %)Custom Type Scheme|(% colspan="2" %)Custom Type|
1099 | |(% colspan="4" %)**Maintainable Artefacts**|(% colspan="2" %)**Content**
1100 | |(% colspan="2" %)**Abstract Class**|(% colspan="2" %)**Concrete Class**|(% colspan="2" %)
1101 | |(% colspan="2" %) |(% colspan="2" %)Name Personalisation Scheme|(% colspan="2" %)Name Personalisation
1102 | |(% colspan="2" %) |(% colspan="2" %)Vtl Mapping Scheme|(% colspan="2" %)Vtl Codelist Mapping
1103 | |(% colspan="2" %) |(% colspan="2" %) |(% colspan="2" %)Vtl Concept Mapping
1104 | |(% colspan="2" %) |(% colspan="2" %) |(% colspan="2" %)Vtl Dataflow Mapping
1105 | |(% colspan="2" %) |(% colspan="2" %) |(% colspan="2" %)(((
1106 Vtl Concept Scheme
1107
1108 Mapping
1109 )))
1110 | |(% colspan="2" %) |(% colspan="2" %)Ruleset Scheme|(% colspan="2" %)Ruleset
1111 | |(% colspan="2" %) |(% colspan="2" %)User Defined Operator Scheme|(% colspan="2" %)User Defined Operator
1112 | |(% colspan="2" %) |(% colspan="2" %) |(% colspan="2" %)
1113 | |(% colspan="2" %)Structure|(% colspan="2" %)Data Structure Definition|(% colspan="2" %)(((
1114 Dimension Descriptor
1115
1116 Group Dimension
1117
1118 Descriptor
1119
1120 Dimension
1121
1122 Measure Dimension
1123
1124 Time Dimension
1125
1126 Attribute Descriptor
1127
1128 Data Attribute
1129
1130 Measure Descriptor
1131
1132 Primary Measure
1133 )))
1134 | |(% colspan="2" %) |(% colspan="2" %)Metadata Structure Definition|(% colspan="2" %)(((
1135 Metadata Target,
1136
1137 Dimension Descriptor
1138
1139 Values Target Identifiable
1140
1141 Object Target
1142
1143 Report Period Target
1144
1145 Data SetTarget
1146
1147 Report Structure
1148
1149 Metadata Attribute
1150 )))
1151 | |(% colspan="2" %)Structure Usage|(% colspan="2" %)Dataflow Definition|(% colspan="2" %)
1152 | |(% colspan="2" %) |(% colspan="2" %)Metadataflow Definition|(% colspan="2" %)
1153 | |(% colspan="2" %)None|(% colspan="2" %)Process|(% colspan="2" %)Process Step
1154 | |(% colspan="2" %)None|(% colspan="2" %)Structure Set|(% colspan="2" %)(((
1155 Component Map
1156
1157 Concept Scheme Map
1158
1159 Codelist Map
1160
1161 Category Scheme Map
1162
1163 Reporting Taxonomy Map
1164
1165 Organisation Scheme Map
1166
1167 Concept Map
1168
1169 Code Map
1170
1171 Category Map
1172
1173 Organisation Map
1174
1175 Reporting Category Map
1176
1177 Hybrid Codelist Map
1178
1179 Hybrid Code Map
1180 )))
1181 | |(% colspan="2" %)None|(% colspan="2" %)Provision Agreement|(% colspan="2" %)
1182 | |(% colspan="2" %)None|(% colspan="2" %)Hierarchical Codelist|(% colspan="2" %)(((
1183 Hierarchy
1184
1185 Hierarchical Code
1186 )))
1187 | | | | | | |
1188
1189 **Table 4: Table of Maintainable Artefacts for Structural Definition Metadata**
1190
1191 === 7.1.2 Item Scheme, Structure ===
1192
1193 The artefacts included in the structural definitions are:
1194
1195 * All types of Item Scheme (Codelist, Concept Scheme, Category Scheme, Organisation Scheme - Agency Scheme, Data Provider Scheme, Data Consumer Scheme, Organisation Unit Scheme)
1196 * All types of Structure (Data Structure Definition, Metadata Structure
1197
1198 Definition)
1199
1200 * All types of Structure Usage (Dataflow Definition, Metadataflow Definition)
1201
1202 === 7.1.3 Structure Usage ===
1203
1204 ==== 7.1.3.1 Structure Usage: Basic Concepts ====
1205
1206 The Structure Usage defines, in its concrete classes of Dataflow Definition and
1207
1208 Metadataflow Definition, which flows of data and metadata use which specific Structure, and importantly for the support of data and metadata discovery, the Structure Usage can be linked to one or more Category in one or more Category Scheme using the Categorisation mechanism. This gives the ability for an application to discover data and metadata by “drilling down” the Category Schemes.
1209
1210 ==== 7.1.3.2 Structure Usage Schematic ====
1211
1212 [[image:1747824123018-658.jpeg]]
1213
1214 **Figure 9: Schematic of Linking the Data and Metadata Flows to Categories and Structure Definitions**
1215
1216 ==== 7.1.3.3 Structure Usage Model ====
1217
1218 **Figure 10: SDMX-IM of links from Structure Usage to Category**
1219
1220 In addition to the maintenance of the Dataflow Definition and the Metadataflow Definition the following links must be maintained in the registry:
1221
1222 * Dataflow Definition to Data Structure Definition
1223 * Metadataflow Definition to Metadata Structure Definition
1224
1225 The following links may be created by means of a Categorisation
1226
1227 * Categorisation to Dataflow Definition and Category
1228 * Categorisation to Metadataflow Definition and Category
1229
1230 == 7.2 Data and Metadata Provisioning ==
1231
1232 === 7.2.1 Provisioning Agreement: Basic concepts ===
1233
1234 Data provisioning defines a framework in which the provision of different types of statistical data and metadata by various data providers can be specified and controlled. This framework is the basis on which the existence of data can be made known to the SDMX-enabled community and hence the basis on which data can subsequently be discovered. Such a framework can be used to regulate the data content to facilitate the building of intelligent applications. It can also be used to facilitate the processing implied by service level agreements, or other provisioning agreements in those scenarios that are based on legal directives. Additionally, quality and timeliness metadata can be supported by this framework which makes it practical to implement information supply chain monitoring.
1235
1236 Note that in the SDMX-IM the class “Data Provider” encompasses both data and metadata and the term “data provisioning” here includes both the provisioning of data and metadata.
1237
1238 Although the Provision Agreement directly supports the data-sharing “pull” model, it is also useful in “push” exchanges (bilateral and gateway scenarios), or in a dissemination environment. It should be noted, too, that in any exchange scenario, the registry functions as a repository of structural metadata.
1239
1240 === 7.2.2 Provisioning Agreement Model – pull use case ===
1241
1242 An organisation which publishes statistical data or reference metadata and wishes to make it available to an SDMX enabled community is called a Data Provider. In terms of the SDMX Information Model, the Data Provider is maintained in a Data Provider Scheme.
1243
1244
1245 **Figure 11: SDMX-IM of the Data Provider**
1246
1247
1248 Note that the Data Provider does not inherit the hierarchy association. The diagram below shows a logical schematic of the data model classes required to maintain provision agreements
1249
1250 [[image:1747824123019-181.jpeg]]
1251
1252 **Figure 12: Schematic of the Provision Agreement**
1253
1254 The diagram below is a logical representation of the data required in order to maintain Provision Agreements.
1255
1256
1257 ==== Figure 13: Logical class diagram of the information contained in the Provision Agreement ====
1258
1259 A Provision Agreement is structural metadata. Each Provision Agreement must reference a Data Provider and a Dataflow or Metadataflow Definition. The Data Provider and the Dataflow/Metadataflow Definition must exist already in order to set up a Provision Agreement.
1260
1261 == 7.3 Data and Metadata Constraints ==
1262
1263 === 7.3.1 Data and Metadata Constraints: Basic Concepts ===
1264
1265 Constraints are, effectively, lists of the valid or actual content of data and metadata. Constraints can be used to specify a sub set of the theoretical content of data set or metadata set which can be derived from the specification of the DSD or MSD. A Constraint can comprise a list of keys or a list of content (usually code values) of a specific component such as a dimension or attribute.
1266
1267 Constraints comprise the specification of subsets of key or target values or attribute values that are contained in a Datasource, or is to be provided for a Dataflow or Metadataflow Definition, or directly attached to a Data Structure Definition or Metadata Structure Definition. This is important metadata because, for example, the full range of possibilities which is implied by the Data Structure Definition (e.g. the complete set of valid keys is the Cartesian product of all the values in the code lists for each of the Dimensions) is often more than is actually present in any specific Datasource, or more than is intended to be supplied according to a specific Dataflow Definition.
1268
1269 Often a Data Provider will not be able to provide data for all key combinations, either because the combination itself is not meaningful, or simply because the provider does not have the data for that combination. In this case the Data Provider could constrain the Datasource (at the level of the Provision Agreement or the Data Provider) by supplying metadata that defines the key combinations or cube regions that are available. This is done by means of a Constraint. The Content Constraint is also used to define a code list sub set which is used to populate a Partial Code List.
1270
1271 Furthermore, it is often useful to define subsets or views of the Data Structure Definition which restrict values in some code lists, especially where many such subsets restrict the same Data Structure Definition. Such a view is called a Dataflow Definition, and there can be one or more defined for any Data Structure Definition.
1272
1273 Whenever data is published or made available by a Data Provider, it must conform to a Dataflow Definition (and hence to a Data Structure Definition). The Dataflow Definition is thus a means of enabling content based processing.
1274
1275 In addition, Constraints can be extremely useful in a data visualisation system, such as dissemination of statistics on a website. In such a system a Cube Region can be used to specify the Dimension codes that actually exist in a datasource (these can be used to build relevant selection tables), and the Key Set can be used to specify the keys that exist in a datasource (these can be used to guide the user to select only those Dimension code values that will return data based on the Dimension values already selected).
1276
1277 === 7.3.2 Data and Metadata Constraints: Schematic ===
1278
1279 [[image:1747824123021-978.jpeg]]
1280
1281 **Figure 14: Schematic of the Constraint and the Artefacts that can be Constrained**
1282
1283 === 7.3.3 Data and Metadata Constraints: Model ===
1284
1285
1286
1287 ==== Figure 15: Logical class diagram showing inheritance between and reference to constrainable artifacts ====
1288
1289 The class diagram above shows that DataProvider, DataflowDefinition, MetadataflowDefinition, ProvisionAgreement, DataStructureDefinition, MetadataStructureDefinition, SimpleDatasource and QueryDatasource are all concrete sub-classes of ConstrainableArtefact and can therefore have Constraints specified. Note that the actual Constraint as submitted is associated to the reference classes which inherit from ConstrainableRef: these are used to refer to the classes to which the Constraint applies.
1290
1291
1292 The content of the Constraint can be found in the SDMX Information Model document.
1293
1294 == 7.4 Data and Metadata Registration ==
1295
1296 === 7.4.1 Basic Concepts ===
1297
1298 A Data Provider has published a new dataset conforming to an existing Dataflow Definition (and hence Data Structure Definition). This is implemented as either a web-accessible SDMX-ML file, or in a database which has a web-services interface capable of responding to an SDMX-ML Query or RESTful query with an SDMX-ML data stream.
1299
1300 The Data Provider wishes to make this new data available to one or more data collectors in a “pull” scenario, or to make the data available to data consumers. To do this, the Data Provider registers the new dataset with one or more SDMX conformant registries that have been configured with structural and provisioning metadata. In other words, the registry “knows” the Data Provider and “knows” what data flows the data provider has agreed to make available.
1301
1302 The same mechanism can be used to report or make available a metadata set.
1303
1304 SDMX-RR supports dataset and metadata set registration via the Registration Request, which can be created by the Data Provider (giving the Data Provider maximum control). The registry responds to the registration request with a registration response which indicates if the registration was successful. In the event of an error, the error messages are returned as a registry exception within the response.
1305
1306 === 7.4.2 The Registration Request ===
1307
1308 ==== 7.4.2.1 Registration Request Schematic ====
1309
1310 [[image:1747824123025-411.jpeg]]
1311
1312 **Figure 16: Schematic of the Objects Concerned with Registration**
1313
1314 ==== 7.4.2.2 Registration Request Model ====
1315
1316 The following UML diagram shows the composition of the registration request. Each request is made up of one or more Registrations, one per dataset or metadata set to be registered. The Registration can optionally have information which has been extracted from the Registration:
1317
1318 * validFrom
1319 * validTo
1320 * lastUpdated
1321
1322 The last updated date is useful during the discovery process to make sure the client knows which data is freshest.
1323
1324 The Registration has an action attribute which takes one of the following values:
1325
1326 |**Action Attribute Value**|**Behaviour**
1327 |Append|Add this Registration to the registry
1328 |Replace|Replace the existing Registration with identified by the id in the Registration of the Submit Registration Request
1329 |Delete|Delete the existing Registration identified by the id in the Registration of the Submit Registration Request
1330
1331 **Figure 17: Logical Class Diagram of Registration of Data and Metadata**
1332
1333 The Query Datasource is an abstract class that represents a data source which can understand an SDMX-ML query (SOAPDatasource) or RESTful query
1334
1335 (RESTDatasource) and respond appropriately. Each of these different Datasources inherit the dataURL from Datasource, and the QueryDatasource has an additional URL to locate a WSDL or WADL document to describe how to access it. All other supported protocols are assumed to use the Simple Datasource URL.
1336
1337 A Simple Datasource is used to reference a physical SDMX-ML file that is available at a URL.
1338
1339 The Registration Request has an action attribute which defines whether this is a new (append) or updated (replace) Registration, or that the Registration is to be deleted (delete). The id is only provided for the replace and delete actions, as the Registry will allocate the unique id of the (new) Registration.
1340
1341 The Registration includes attributes that state how a Simple Datasource is to be indexed when registered. The Registry registration process must act as follows.
1342
1343 Information in the data or metadata set is extracted and placed in one or more Content Constraints (see the Constraints model in the SDMX Information Model – Section 2 of the SDMX Standards). The information to be extracted is indicated by the Boolean values set on the Provision Agreement as shown in the table below.
1344
1345 |**Indexing Required**|**Registration Process Activity**
1346 |indexTimeSeries|Extract all the series keys and create a KeySet(s) Constraint.
1347 |indexDataSet|(((
1348 Extract all the codes and other content of the Key value of the Series Key in a Data Set and create one or more Cube
1349
1350 Regions containing Member Selections of Dimension Components of the Constraints model in the SDMX-IM, and the associated Selection Value.
1351 )))
1352 |indexReportingPeriod|(((
1353 This applies only to a registered dataset.
1354
1355 Extract the Reporting Begin and Reporting End from the Header of the Message containing the data set, and create a Reference Period constraint.
1356 )))
1357 |indexAttributes|(((
1358 **Data Set**
1359
1360 Extract the content of the Attribute Values in a Data Set and create one or more Cube Regions containing Member Selections of Data Attribute Components of the Constraints model in the SDMXIM, and the associated Selection Value
1361
1362 **Metadata Set**
1363
1364 Indicate the presence of a Reported Attribute by creating one or more Cube Regions containing Member Selections of Metadata Attribute Components of the Constraints model in the SDMX-IM. Note that the content is not stored in the Selection Value.
1365 )))
1366
1367 Constraints that specify the contents of a Query Datasource are submitted to the Registry in a Submit Structure Request.
1368
1369 The Registration must reference the Provision Agreement to which it relates.
1370
1371 === 7.4.3 Registration Response ===
1372
1373 After a registration request has been submitted to the registry, a response is returned to the submitter indicating success or failure. Given that a registration request can hold many Registrations, then there must be a registration status for each Registration. The Submit Registration class has a status field which is either set to
1374
1375 “Success”, “Warning” or “Failure”.
1376
1377 If the registration has succeeded, a Registration will be returned - this holds the Registry-allocated Id of the newly registered Datasource plus a Datasource holding the URL to access the dataset, metadataset, or query service.
1378
1379 The Registration Response returns set of registration status (one for each registration submitted) in terms of a Status Message (this is common to all Registry Responses) that indicates success or failure. In the event of registration failure, a set of Message Text are returned, giving the error messages that occurred during registration. It is entirely possible when registering a batch of datasets, that the response will contain some successful and some failed statuses. The logical model for the Registration Response is shown below:
1380
1381
1382 **Figure 18: Logical class diagram showing the registration response**
1383
1384 == 7.5 Subscription and Notification Service ==
1385
1386 The contents of the SDMX Registry/Repository will change regularly: new code lists and key families will be published, new datasets and metadata-sets will be registered. To obviate the need for users to repeatedly query the registry to see when new information is available, a mechanism is provided to allow users to be notified when these events happen.
1387
1388 A user can submit a subscription in the registry that defines which events are of interest, and either an email and/or an HTTP address to which a notification of qualifying events will be delivered. The subscription will be identified in the registry by a URN which is returned to the user when the subscription is created. If the user wants to delete the subscription at a later point, the subscription URN is used as identification. Subscriptions have a validity period expressed as a date range (startDate, endDate) and the registry may delete any expired subscriptions, and will notify the subscriber on expiry.
1389
1390 When a registry/repository artefact is modified, any subscriptions which are observing the object are activated, and either an email or HTTP POST is instigated to report details of the changes to the user specified in the subscription. This is called a
1391
1392 “notification”.
1393
1394 7.5.1Subscription Logical Class Diagram
1395
1396
1397 [[image:1747824123028-257.png]]
1398
1399 **Figure 19: Logical Class Diagram of the Subscription**
1400
1401 === 7.5.2 Subscription Information ===
1402
1403 Regardless of the type of registry/repository events being observed, a subscription always contains:
1404
1405 ~1. A set of URIs describing the end-points to which notifications must be sent if the subscription is activated. The URIs can be either mailto~: or http: protocol. In the former case an email notification is sent; in the latter an HTTP POST notification is sent.
1406
1407 2. A user-defined identifier which is returned in the response to the subscription request. This helps with asynchronous processing and is NOT stored in the Registry.
1408
1409 3. A validity period which defines both when the subscription becomes active and expires. The subscriber may be sent a notification on expiration of the subscription.
1410
1411 4. A selector which specifies which type of events are of interest. The set of event types is:
1412
1413 |**Event Type**|**Comment**
1414 |STRUCTURAL_REPOSITORY_EVENTS|Life-cycle changes to Maintainable Artefacts in the structural metadata repository.
1415 |DATA_REGISTRATION_EVENTS|Whenever a published dataset is registered. This can be either a SDMXML data file or an SDMX conformant database.
1416 |METADATA_REGISTRATION_EVENTS|Whenever a published metadataset is registered. This can be either a SDMXML reference metadata file or an SDMX conformant database.
1417 |ALL_EVENTS|All events of the specified EventType
1418
1419 === 7.5.3 Wildcard Facility ===
1420
1421 Subscription notification supports wildcarded identifier components URNs, which are identiiers which have some or all of their component parts replaced by the wildcard character `%`. Identifier components comprise:
1422
1423  agencyID
1424
1425  id
1426
1427  version
1428
1429 Examples of wildcarded identifier components for an identified object type of Codelist are shown below.
1430
1431 AgencyID = %
1432
1433 Id = %
1434
1435 Version = %
1436
1437 This subscribes to all Codelists of all versions for all agencies.
1438
1439 AgencyID = AGENCY1
1440
1441 Id = CODELIST1
1442
1443 Version = %
1444
1445 This subscribes to all versions of Codelist CODELIST1 maintained by the agency
1446
1447 AGENCY1
1448
1449 AgencyID = AGENCY1
1450
1451 Id = %
1452
1453 Version = %
1454
1455 This subscribes to all versions of all Codelist objects maintained by the agency
1456
1457 AGENCY1
1458
1459 AgencyID = %
1460
1461 Id = CODELIST1
1462
1463 Version = %
1464
1465 This subscribes to all versions of Codelist CODELIST1 maintained by the agency
1466
1467 AGENCY1
1468
1469 Note that if the subscription is to the latest version then this can be achieved by the * character
1470
1471 i.e. Version = *
1472
1473 Note that a subscription using the URN mechanism cannot use wildcard characters.
1474
1475 === 7.5.4 Structural Repository Events ===
1476
1477 Whenever a maintainable artefact (data structure definition, concept scheme, codelist, metadata structure definition, category scheme, etc.) is added to, deleted from, or modified in the structural metadata repository, a structural metadata event is triggered. Subscriptions may be set up to monitor all such events, or focus on specific artefacts such as a Data Structure Definition.
1478
1479 === 7.5.5 Registration Events ===
1480
1481 Whenever a dataset or metadata-set is registered a registration event is created. A subscription may be observing all data or metadata registrations, or it may focus on specific registrations as shown in the table below:
1482
1483
1484 |**Selector**|**Comment**
1485 |DataProvider|Any datasets or metadata sets registered by the specified data provider will activate the notification.
1486 |ProvisionAgreement|Any datasets or metadata sets registered for the provision agreement will activate the notification.
1487 |Dataflow (&Metadataflow)|Any datasets or metadata sets registered for the specified dataflow (or metadataflow) will activate the notification.
1488 |DataStructureDefinition & MetadataStructureDefinition|Any datasets or metadata sets registered for those dataflows (or metadataflows) that are based on the specified Data Structure Definition will
1489 |**Selector**|**Comment**
1490 | |activate the notification.
1491 |Category|Any datasets or metadata sets registered for those dataflows, metadataflows, provision agreements that are categorised by the category.
1492
1493 The event will also capture the semantic of the registration: deletion or replacement of an existing registration or a new registration.
1494
1495 == 7.6 Notification ==
1496
1497 === 7.6.1 Logical Class Diagram ===
1498
1499
1500 ==== Figure 20: Logical Class Diagram of the Notification ====
1501
1502 A notification is an XML document that is sent to a user via email or http POST whenever a subscription is activated. It is an asynchronous one-way message.
1503
1504 Regardless of the registry component that caused the event to be triggered, the following common information is in the message:
1505
1506 * Date and time that the event occurred
1507 * The URN of the artefact that caused the event
1508 * The URN of the Subscription that produced the notification
1509 * Event Action: Add, Replace, or Delete.
1510
1511 Additionally, supplementary information may be contained in the notification as detailed below.
1512
1513 === 7.6.2 Structural Event Component ===
1514
1515 The notification will contain the MaintainableArtefact that triggered the event in a form similar to the SDMX-ML structural message (using elements from that namespace).
1516
1517 === 7.6.3 Registration Event Component ===
1518
1519 The notification will contain the Registration.
1520
1521