Changes for page SDMX 2.1 Standards. Section 6. Technical Notes

Last modified by Artur K. on 2025/08/19 10:43

From 6.1 to 6.2 From 7.22 to 7.23

From version 6.2

edited by Helena K.
on 2025/05/21 22:02

Change comment: There is no comment for this version

To version 7.22

edited by Helena K.
on 2025/05/21 22:40

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 16 added, 0 removed)

Details

Page properties

Content

@@ -69,13 +69,15 @@
  To allow for applications which only understand time series data, variations of these formats have been introduced in the form of two data messages; //GenericTimeSeriesData// and //StructureSpecificTimeSeriesData//. It is important to note that these variations are built on the same root structure and can be processed in the same manner as the base format so that they do NOT introduce additional processing requirements.
--=== //Structure Definition// ===
++(% class="wikigeneratedid" id="HStructureDefinition" %)
++**//Structure Definition//**
  The SDMX-ML Structure Message supports the use of annotations to the structure, which is not supported by the SDMX-EDI syntax.
  The SDMX-ML Structure Message allows for the structures on which a Data Structure Definition depends – that is, codelists and concepts – to be either included in the message or to be referenced by the message containing the data structure definition. XML syntax is designed to leverage URIs and other Internet-based referencing mechanisms, and these are used in the SDMX-ML message. This option is not available to those using the SDMX-EDI structure message.
--=== //Validation// ===
++(% class="wikigeneratedid" id="HValidation" %)
++**//Validation//**
  SDMX-EDI – as is typical of EDIFACT syntax messages – leaves validation to dedicated applications (“validation” being the checking of syntax, data typing, and adherence of the data message to the structure as described in the structural definition.)
@@ -83,19 +83,22 @@
  The SDMX-ML DSD-specific messages will allow validation of XML syntax and datatyping to be performed with a generic XML parser, and enforce agreement between the structural definition and the data to a moderate degree with the same tool.
--=== //Update and Delete Messages and Documentation Messages// ===
++(% class="wikigeneratedid" id="HUpdateandDeleteMessagesandDocumentationMessages" %)
++//Update and Delete Messages and Documentation Messages//
  All SDMX data messages allow for both delete messages and messages consisting of only data or only documentation.
--=== //Character Encodings// ===
++(% class="wikigeneratedid" id="HCharacterEncodings" %)
++**//Character Encodings//**
  All SDMX-ML messages use the UTF-8 encoding, while SDMX-EDI uses the ISO 8879-1 character encoding. There is a greater capacity with UTF-8 to express some character sets (see the “APPENDIX: MAP OF ISO 8859-1 (UNOC) CHARACTER SET (LATIN 1 OR “WESTERN”) in the document “SYNTAX AND DOCUMENTATION VERSION 2.0”.) Many transformation tools are available which allow XML instances with UTF-8 encodings to be expressed as ISO 8879-1-encoded characters, and to transform UTF-8 into ISO 8879-1. Such tools should be used when transforming SDMX-ML messages into SDMX-EDI messages and vice-versa.
--=== //Data Typing// ===
++(% class="wikigeneratedid" id="HDataTyping" %)
++**//Data Typing//**
  The XML syntax and EDIFACT syntax have different data-typing mechanisms. The section below provides a set of conventions to be observed when support for messages in both syntaxes is required. For more information on the SDMX-ML representations of data, see below.
--==== 3.3.2 Data Types ====
++=== 3.3.2 Data Types ===
  The XML syntax has a very different mechanism for data-typing than the EDIFACT syntax, and this difference may create some difficulties for applications which support both EDIFACT-based and XML-based SDMX data formats. This section provides a set of conventions for the expression in data in all formats, to allow for clean interoperability between them.
@@ -409,7 +409,7 @@
  This is used to unambiguously state that a date-time represents an observation at a single point in time. Therefore, if one wants to use SDMX for data which is measured at a distinct point in time rather than being reported over a period, the date-time representation can be used.
--Representation: xs:dateTime (YYYY-MM-DDThh:mm:ss)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[1~]^^>>path:#_ftn1]]
++Representation: xs:dateTime (YYYY-MM-DDThh:mm:ss)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[1~]^^>>path:#_ftn1]]
  === 4.2.6 Standard Reporting Period ===
@@ -458,7 +458,7 @@
  Period Duration: P7D (seven days)
  Limit per year: 53
  Representation: common:ReportingWeekType (YYYY-Www, e.g. 2000-W53)
--Notes: There are either 52 or 53 weeks in a reporting year. This is based on the ISO 8601 definition of a week (Monday - Saturday), where the first week of a reporting year is defined as the week with the first Thursday on or after the reporting year start day.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[2~]^^>>path:#_ftn2]](%%) The reporting week is always represented as two digits, therefore 1-9 are 0 padded (e.g. 01). This allows the values to be sorted chronologically using textual sorting methods.
++Notes: There are either 52 or 53 weeks in a reporting year. This is based on the ISO 8601 definition of a week (Monday - Saturday), where the first week of a reporting year is defined as the week with the first Thursday on or after the reporting year start day.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[2~]^^>>path:#_ftn2]](%%) The reporting week is always represented as two digits, therefore 1-9 are 0 padded (e.g. 01). This allows the values to be sorted chronologically using textual sorting methods.
  **Reporting Day**:
  Period Indicator: D
@@ -497,7 +497,7 @@
  g) If the [PERIOD_INDICATOR] is D, the [PERIOD_DURATION] is P1D.
  **3. Determine [PERIOD_START]:**
--Subtract one from the [PERIOD_VALUE] and multiply this by the [PERIOD_DURATION]. Add[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[3~]^^>>path:#_ftn3]](%%) this to the [REPORTING_YEAR_BASE]. The result is the [PERIOD_START].
++Subtract one from the [PERIOD_VALUE] and multiply this by the [PERIOD_DURATION]. Add[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[3~]^^>>path:#_ftn3]](%%) this to the [REPORTING_YEAR_BASE]. The result is the [PERIOD_START].
  **4. Determine the [PERIOD_END]:**
  Multiply the [PERIOD_VALUE] by the [PERIOD_DURATION]. Add^^3^^ this to the [REPORTING_YEAR_BASE] add^^3^^ -P1D. The result is the [PERIOD_END].
@@ -642,9 +642,7 @@
  **Examples:**
  **Gregorian Period**
--
  Query Parameter: Greater than 2010
--
  Literal Interpretation: Any data where the start period occurs after 2010-1231T23:59:59.
  Example Matches:
@@ -662,15 +662,11 @@
  * 2010-D185 or later (reporting year start day ~-~-07-01 or later)
  **Reporting Period with explicit start day**
--
  Query Parameter: Greater than or equal to 2009-Q3, reporting year start day = "-07-01"
--
  Literal Interpretation: Any data where the start period occurs on after 2010-0101T00:00:00 (Note that in this case 2009-Q3 is converted to the explicit date range of 2010-01-01/2010-03-31 because of the reporting year start day value). Example Matches: Same as previous example
  **Reporting Period with "Any" start day**
--
  Query Parameter: Greater than or equal to 2010-Q3, reporting year start day = "Any"
--
  Literal Interpretation: Any data with a reporting period where the start period is on or after the start period of 2010-Q3 for the same reporting year start day, or and data where the start period is on or after 2010-07-01. Example Matches:
  * 2011 or later
@@ -682,13 +682,10 @@
  * 2010-T3 (any reporting year start day)
  * 2010-Q3 or later (any reporting year start day)
  * 2010-M07 or later (any reporting year start day)
--* 2010-W27 or later (reporting year start day ~-~-01-01)^^4^^  2010-D182 or later (reporting year start day ~-~-01-01)
--* 2010-W28 or later (reporting year start day ~-~-07-01)^^5^^
++* 2010-W27 or later (reporting year start day ~-~-01-01){{footnote}}2010-Q3 (with a reporting year start day of --01-01) starts on 2010-07-01. This is day 4 of week 26, therefore the first week matched is week 27.{{/footnote}}  2010-D182 or later (reporting year start day ~-~-01-01)
++* 2010-W28 or later (reporting year start day ~-~-07-01){{footnote}}2010-Q3 (with a reporting year start day of --07-01) starts on 2011-01-01. This is day 6 of week 27, therefore the first week matched is week 28.{{/footnote}}
++* 2010-D185 or later (reporting year start day ~-~-07-01)
--^^4^^ 2010-Q3 (with a reporting year start day of ~-~-01-01) starts on 2010-07-01. This is day 4 of week 26, therefore the first week matched is week 27.
--
-- 2010-D185 or later (reporting year start day ~-~-07-01)
--
  == 4.3 Structural Metadata Querying Best Practices ==
  When querying for structural metadata, the ability to state how references should be resolved is quite powerful. However, this mechanism is not always necessary and can create an undue burden on the systems processing the queries if it is not used properly.
@@ -705,8 +705,6 @@
  This mechanism is an “early binding” one – everything with a versioned identity is a known quantity, and will not change. It is worth pointing out that in some cases relationships are essentially one-way references: an illustrative case is that of Categories. While a Category may be referenced by many dataflows and metadata flows, the addition of more references from flow objects does not version the Category. This is because the flows are not properties of the Categories – they merely make references to it. If the name of a Category changed, or its subCategories changed, then versioning would be necessary.
--^^5^^ 2010-Q3 (with a reporting year start day of ~-~-07-01) starts on 2011-01-01. This is day 6 of week 27, therefore the first week matched is week 28.
--
  Versioning operates at the level of versionable and maintainable objects in the SDMX information model. If any of the children of objects at these levels change, then the objects themselves are versioned.
  One area which is much impacted by this versioning scheme is the ability to reference external objects. With the many dependencies within the various structural objects in SDMX, it is useful to have a scheme for external referencing. This is done at the level of maintainable objects (DSDs, code lists, concept schemes, etc.) In an SDMX-ML Structure Message, whenever an “isExternalReference” attribute is set to true, then the application must resolve the address provided in the associated “uri” attribute and use the SDMX-ML Structure Message stored at that location for the full definition of the object in question. Alternately, if a registry “urn” attribute has been provided, the registry can be used to supply the full details of the object.
@@ -729,13 +729,13 @@
  [[image:1747836776649-282.jpeg]]
--1. **1: Schematic of the Metadata Structure Definition**
++**Figure 1: Schematic of the Metadata Structure Definition**
  The MSD comprises the specification of the object types to which metadata can be reported in a Metadata Set (Metadata Target(s)), and the Report Structure(s) comprising the Metadata Attributes that identify the Concept for which metadata may be reported in the Metadata Set. Importantly, one Report Structure references the Metadata Target for which it is relevant. One Report Structure can reference many Metadata Target i.e. the same Report Structure can be used for different target objects.
  [[image:1747836776655-364.jpeg]]
--1. **2: Example MSD showing Metadata Targets**
++**Figure 2: Example MSD showing Metadata Targets**
  Note that the SDMX-ML schemas have explicit XML elements for each identifiable object type because identifying, for instance, a Maintainable Object has different properties from an Identifiable Object which must also include the agencyId, version, and id of the Maintainable Object in which it resides.
@@ -745,8 +745,10 @@
  [[image:1747836776658-510.jpeg]]
--**Figure 3: Example MSD showing specification of three Metadata Attributes **This example shows the following hierarchy of Metadata Attributes:
++**Figure 3: Example MSD showing specification of three Metadata Attributes**
++This example shows the following hierarchy of Metadata Attributes:
++
  Source – this is presentational and no metadata is expected to be reported at this level
  * Source Type
@@ -760,10 +760,7 @@
    **Figure 4: Example Metadata Set **This example shows:
--1. The reference to the MSD, Metadata Report, and Metadata Target
--
--(MetadataTargetValue)
--
++1. The reference to the MSD, Metadata Report, and Metadata Target (MetadataTargetValue)
 . The reported metadata attributes (AttributeValueSet)
  = 6 Maintenance Agencies =
@@ -820,8 +820,9 @@
  The Information Model for this is shown below:
++[[image:1747855024745-946.png]]
--  **Figure 8: Information Model Extract for Concept Role**
++**Figure 8: Information Model Extract for Concept Role**
  It is possible to specify zero or more concept roles for a Dimension, Measure Dimension and Data Attribute (but not the ReportingYearStartDay). The Time Dimension, Primary Measure, and the  Attribute ReportingYearStartDay have explicitly defined roles and cannot be further specified with additional concept roles.
@@ -841,13 +841,14 @@
  The Cross-Domain Concept Scheme maintained by SDMX contains concept role concepts (FREQ chosen as an example).
--[[image:1747836776691-440.jpeg]]
++[[image:1747855054559-410.png]]
++
  Whether this is a role or not depends upon the application understanding that FREQ in the Cross-Domain Concept Scheme is a role of Frequency.
  Using a Concept Scheme that is not the Cross-Domain Concept Scheme where it is required to assign a role using the Cross-Domain Concept Scheme. Again FREQ is chosen as the example.
--[[image:1747836776693-898.jpeg]]
++[[image:1747855075263-887.png]]
  This explicitly states that this Dimension is playing a role identified by the FREQ concept in the Cross-Domain Concept Scheme. Again the application needs to understand what FREQ in the Cross-Domain Concept Scheme implies in terms of a role.
@@ -897,7 +897,7 @@
  == 8.3 Rules for a Content Constraint ==
--=== 8.3.1      Scope of a Content Constraint ===
++=== 8.3.1 (% style="color:inherit; font-family:inherit; font-size:max(21px, min(23px, 17.4444px + 0.462963vw))" %)Scope of a Content Constraint(%%) ===
  A Content Constraint is used specify the content of a data or metadata source in terms of the component values or the keys.
@@ -936,54 +936,54 @@
  In view of the flexibility of constraints attachment, clear rules on their usage are required. These are elaborated below.
--=== 8.3.2      Multiple Content Constraints ===
++=== 8.3.2 Multiple Content Constraints ===
  There can be many Content Constraints for any Constrainable Artefact (e.g. DSD), subject to the following restrictions:
--**8.3.2.1 Cube Region**
++==== 8.3.2.1 Cube Region ====
 . The constraint can contain multiple Member Selections (e.g. Dimension) but:
 . A specific  Member Selection (e.g. Dimension FREQ)  can only be contained in one Content Constraint for any one attached object (e.g. a specific DSD or specific Dataflow)
--**8.3.2.2 Key Set**
++==== 8.3.2.2 Key Set ====
  Key Sets will be processed in the order they appear in the Constraint and wildcards can be used (e.g. any key position not reference explicitly is deemed to be “all values”). As the Key Sets can be “included” or “excluded” it is recommended that Key Sets with wildcards are declared before KeySets with specific series keys. This will minimize the risk that keys are inadvertently included or excluded.
--=== 8.3.3      Inheritance of a Content Constraint ===
++=== 8.3.3 Inheritance of a Content Constraint ===
--**8.3.3.1 Attachment levels of a Content Constraint**
++==== 8.3.3.1 Attachment levels of a Content Constraint ====
  There are three levels of constraint attachment for which these inheritance rules apply:
-- DSD/MSD – top level o Dataflow/Metadataflow – second level
++* DSD/MSD – top level
++** Dataflow/Metadataflow – second level
++*** Provision Agreement – third level
--§ Provision Agreement – third level
--
  Note that these rules do not apply to the Simple Datasoucre or Queryable Datasource: the Content Constraint(s) attached to these artefacts are resolved for this artefact only and do not take into account Constraints attached to other artefacts (e.g. Provision Agreement. Dataflow, DSD).
  It is not necessary for a Content Constraint to be attached to higher level artifact. e.g. it is valid to have a Content Constraint for a Provision Agreement where there are no constraints attached the relevant dataflow or DSD.
--**8.3.3.2 Cascade rules for processing Constraints**
++==== 8.3.3.2 Cascade rules for processing Constraints ====
  The processing of the constraints on either Dataflow/Metadataflow or Provision Agreement must take into account the constraints declared at higher levels. The rules for the lower level constraints (attached to Dataflow/ Metadataflow and Provision Agreement) are detailed below.
  Note that there can be a situation where a constraint is specified at a lower level before a constraint is specified at a higher level. Therefore, it is possible that a higher level constraint makes a lower level constraint invalid. SDMX makes no rules on how such a conflict should be handled when processing the constraint for attachment. However, the cascade rules on evaluating constraints for usage are clear - the higher level constraint takes precedence in any conflicts that result in a less restrictive specification at the lower level.
--**8.3.3.3 Cube Region**
++==== 8.3.3.3 Cube Region ====
 . It is not necessary to have a constraint on the higher level artifact (e.g. DSD referenced by the Dataflow) but if there is such a constraint at the higher level(s) then:
--11. The lower level constraint cannot be less restrictive than the constraint specified for the same Member Selection (e.g. Dimension) at the next higher level which constraints that Member Selection (e.g. if the Dimension FREQ is constrained to A, Q in a DSD then the constraint at the Dataflow or Provision Agreement cannot be A, Q, M or even just M – it can only further constrain A,Q).
--11. The constraint at the lower level for any one Member Selection further constrains the content for the same Member Selection at the higher level(s).
++a. The lower level constraint cannot be less restrictive than the constraint specified for the same Member Selection (e.g. Dimension) at the next higher level which constraints that Member Selection (e.g. if the Dimension FREQ is constrained to A, Q in a DSD then the constraint at the Dataflow or Provision Agreement cannot be A, Q, M or even just M – it can only further constrain A,Q).
++b. The constraint at the lower level for any one Member Selection further constrains the content for the same Member Selection at the higher level(s).
 . Any Member Selection which is not referenced in a Content Constraint is deemed to be constrained according to the Content Constraint specified at the next higher level which constraints that Member Selection.
 . If there is a conflict when resolving the constraint in terms of a lower-level constraint being less restrictive than a higher-level constraint then the constraint at the higher-level is used.
  Note that it is possible for a Content Constraint at a higher level to constrain, say, four Dimensions in a single constraint, and a Content Constraint at a lower level to constrain the same four in two, three, or four Content Constraints.
--**8.3.3.4 Key Set**
++==== 8.3.3.4 Key Set ====
 . It is not necessary to have a constraint on the higher level artefact (e.g. DSD referenced by the Dataflow) but if there is such a constraint at the higher level(s) then:
--11. The lower level constraint cannot be less restrictive than the constraint specified at the higher level.
--11. The constraint at the lower level for any one Member Selection further constrains the keys specified at the higher level(s).
++a. The lower level constraint cannot be less restrictive than the constraint specified at the higher level.
++b. The constraint at the lower level for any one Member Selection further constrains the keys specified at the higher level(s).
 . Any Member Selection which is not referenced in a Content Constraint is deemed to be constrained according to the Content Constraint specified at the next higher level which constraints that Member Selection.
 . If there is a conflict when resolving the keys in the constraint at two levels, in terms of a lower-level constraint being less restrictive than a higher-level constraint, then the offending keys specified at the lower level are not deemed part of the constraint.
@@ -997,11 +997,12 @@
 . At the lower level inherit all keys that match with the higher level constraint.
 . If there are keys in the lower level constraint that are not inherited then the key is invalid (i.e. it is less restrictive).
--**8.3.4       Constraints Examples**
++=== 8.3.4 Constraints Examples ===
  The following scenario is used.
--=== DSD ===
++(% class="wikigeneratedid" id="HDSD" %)
++__DSD__
  This contains the following Dimensions:
@@ -1013,111 +1013,47 @@
  In the DSD common code lists are used and the requirement is to restrict these at various levels to specify the actual code that are valid for the object to which the Content Constraint is attached.
--|(((
--
--)))
++[[image:1747855493531-357.png]]
--|(((
--
--)))
++**Figure 10: Example Scenario for Constraints**
--|(((
--
--)))
--
--|(((
--**Figure**
--)))
--
--|(((
--**10**
--)))
--
--|(((
--**:**
--)))
--
--|(((
--**~ Example Sce**
--)))
--
--|(((
--**nario for Constraints**
--)))
--
--|(((
--**~ **
--)))
--
--
--
  Constraints are declared as follows:
++[[image:1747855462293-368.png]]
--|(((
--
--)))
++**Figure 11: Example Content Constraints**
--|(((
--
--)))
--
--|(((
--
--)))
--
--|(((
--**Figure**
--)))
--
--|(((
--**11**
--)))
--
--|(((
--**:**
--)))
--
--|(((
--**~ Example Content Constraints**
--)))
--
--|(((
--**~ **
--)))
--
--
--
  **Notes:**
--1. AGE is constrained for the DSD and is further restricted for the Dataflow
--
--CENSUS_CUBE1.
--
++1. AGE is constrained for the DSD and is further restricted for the Dataflow CENSUS_CUBE1.
 . The same Constraint applies to both Provision Agreements.
  The cascade rules elaborated above result as follows:
--DSD
++__DSD__
  ~1. Constrained by eliminating code 001 from the code list for the AGE Dimension.
--=== Dataflow CENSUS_CUBE1 ===
++(% class="wikigeneratedid" id="HDataflowCENSUS_CUBE1" %)
++__Dataflow CENSUS_CUBE1__
 . Constrained by restricting the code list for the AGE Dimension to codes 002 and 003(note that this is a more restrictive constraint than that declared for the DSD which specifies all codes except code 001).
 . Restricts the CAS codes to 003 and 004.
--=== Dataflow CENSUS_CUBE2 ===
++(% class="wikigeneratedid" id="HDataflowCENSUS_CUBE2" %)
++__Dataflow CENSUS_CUBE2__
 . Restricts the code list for the CAS Dimension to codes TOT and NAP.
 . Inherits the AGE constraint applied at the level of the DSD.
--=== Provision Agreements CENSUS_CUBE1_IT ===
++(% class="wikigeneratedid" id="HProvisionAgreementsCENSUS_CUBE1_IT" %)
++__Provision Agreements CENSUS_CUBE1_IT__
 . Restricts the codes for the GEO Dimension to IT and its children.
 . Inherits the constraints from Dataflow CENSUS_CUBE1  for the AGE and CAS Dimensions.
--=== Provision Agreements CENSUS_CUBE2_IT ===
++(% class="wikigeneratedid" id="HProvisionAgreementsCENSUS_CUBE2_IT" %)
++__Provision Agreements CENSUS_CUBE2_IT__
 . Restricts the codes for the GEO Dimension to IT and its children.
 . Inherits the constraints from Dataflow CENSUS_CUBE2 for the CAS Dimension.
@@ -1125,17 +1125,20 @@
  The constraints are defined as follows:
--=== DSD Constraint ===
++(% class="wikigeneratedid" id="HDSDConstraint" %)
++__DSD Constraint__
  [[image:1747836776698-720.jpeg]]
--=== Dataflow Constraints ===
++(% class="wikigeneratedid" id="HDataflowConstraints" %)
++__Dataflow Constraints__
  [[image:1747836776701-360.jpeg]]
  === [[image:1747836776707-834.jpeg]] ===
--=== Provision Agreement Constraint ===
++(% class="wikigeneratedid" id="HProvisionAgreementConstraint" %)
++__Provision Agreement Constraint__
  [[image:1747836776710-262.jpeg]]
@@ -1147,7 +1147,7 @@
  == 9.2 Groups and Dimension Groups ==
--=== 9.2.1      Issue ===
++=== 9.2.1 Issue ===
  Version 2.1 introduces a more granular mechanism for specifying the relationship between a Data Attribute and the Dimensions to which the attribute applies. The technical construct for this is the Dimension Group. This Dimension Group has no direct equivalent in versions 2.0 and 1.0 and so the application transforming data from a version 2.1 data set to a version 2.0 or version 1.0 data set must decide to which construct the attribute value, whose Attribute is declared in a Dimension Group, should be attached. The closest construct is the “Series” attachment level and in many cases this is the correct construct to use.
@@ -1160,7 +1160,7 @@
  If the conditions defined in 9.2.1are true then on conversion to a version 2.0 or 1.0 DSD (Key Family) the Component/Attribute.attachmentLevel must be set to “Group” and the Component/Attribute/AttachmentGroup” is used to identify the Group. Note that under rule(1) in 1.2.1 this group will have been defined in the V 2.1 DSD and so will be present in the V 2.0 transformation.
--=== 9.2.3      Data ===
++=== 9.2.3 Data ===
  If the conditions defined in 9.2.1are true then, on conversion from a 2.1 data set to a 2.0 or 1.0 dataset the attribute value will be placed in the relevant <Group>. If these conditions are not true then the attribute value will be placed in the <Series>.
@@ -1172,7 +1172,7 @@
  == 10.1 Introduction ==
--The Validation and Transformation Language (VTL) supports the definition of Transformations, which are algorithms to calculate new data starting from already existing ones[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[4~]^^>>path:#_ftn4]](%%). The purpose of the VTL in the SDMX context is to enable the:
++The Validation and Transformation Language (VTL) supports the definition of Transformations, which are algorithms to calculate new data starting from already existing ones[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[4~]^^>>path:#_ftn4]](%%). The purpose of the VTL in the SDMX context is to enable the:
  * definition of validation and transformation algorithms, in order to specify how to calculate new data  from existing ones;
  * exchange of the definition of VTL algorithms, also together the definition of the data structures of the involved data (for example, exchange the data structures of a reporting framework together with the validation rules to be applied, exchange the input and output data structures of a calculation task together with the VTL Transformations describing the calculation algorithms);
@@ -1194,10 +1194,8 @@
  The alias of a SDMX artefact can be its URN (Universal Resource Name), an abbreviation of its URN or another user-defined name.
--In any case, the aliases used in the VTL transformations have to be mapped to the
++In any case, the aliases used in the VTL transformations have to be mapped to the SDMX artefacts through the VtlMappingScheme and VtlMapping classes (see the section of the SDMX IM relevant to the VTL). A VtlMapping allows specifying the aliases to be used in the VTL transformations, rulesets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[5~]^^>>path:#_ftn5]](%%) or user defined operators[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[6~]^^>>path:#_ftn6]](%%)  to reference SDMX artefacts. A VtlMappingScheme is a container for zero or more VtlMapping.
--SDMX artefacts through the VtlMappingScheme and VtlMapping classes (see the section of the SDMX IM relevant to the VTL). A VtlMapping allows specifying the aliases to be used in the VTL transformations, rulesets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[5~]^^>>path:#_ftn5]](%%) or user defined operators[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[6~]^^>>path:#_ftn6]](%%)  to reference SDMX artefacts. A VtlMappingScheme is a container for zero or more VtlMapping.
--
  The correspondence between an alias and a SDMX artefact must be one-to-one, meaning that a generic alias  identifies one and just one SDMX artefact while a SDMX artefact is identified by one and just one alias. In other words, within a VtlMappingScheme an artefact can have just one alias and different artefacts cannot have the same alias.
  The references through the URN and the abbreviated URN are described in the following paragraphs.
@@ -1206,7 +1206,7 @@
  This approach has the advantage that in the VTL code the URN of the referenced artefacts is directly intelligible by a human reader but has the drawback that the references are verbose.
--The SDMX URN[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[7~]^^>>path:#_ftn7]](%%) is the concatenation of the following parts, separated by special symbols like dot, equal, asterisk, comma, and parenthesis:^^ ^^
++The SDMX URN[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[7~]^^>>path:#_ftn7]](%%) is the concatenation of the following parts, separated by special symbols like dot, equal, asterisk, comma, and parenthesis:^^ ^^
  * SDMXprefix
  * SDMX-IM-package-name
@@ -1214,7 +1214,7 @@
  * agency-id
  * maintainedobject-id
  * maintainedobject-version
--* container-object-id [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[8~]^^>>path:#_ftn8]]
++* container-object-id [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[8~]^^>>path:#_ftn8]]
  * object-id
  The generic structure of the URN is the following:
@@ -1233,13 +1233,13 @@
  The **agency-id** is the acronym of the agency that owns the definition of the artefact, for example for the Eurostat artefacts the agency-id is “ESTAT”). The agency-id can be composite (for example AgencyA.Dept1.Unit2).
--The **maintainedobject-id** is the name of the maintained object which the artefact belongs to, and in case the artefact itself is maintainable[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[9~]^^>>path:#_ftn9]](%%), coincides with the name of the artefact. Therefore the maintainedobject-id depends on the class of the artefact:
++The **maintainedobject-id** is the name of the maintained object which the artefact belongs to, and in case the artefact itself is maintainable[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[9~]^^>>path:#_ftn9]](%%), coincides with the name of the artefact. Therefore the maintainedobject-id depends on the class of the artefact:
--* if the artefact is a ,,Dataflow,,, which is a maintainable class,  the maintainedobject-id is the Dataflow name (dataflow-id);
--* if the artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure or DataAttribute, which are not maintainable and belong to the ,,DataStructure,, maintainable class, the maintainedobject-id is the name of the DataStructure (dataStructure-id) which the artefact belongs to;
--* if the artefact is a ,,Concept,,, which is not maintainable and belongs to the ConceptScheme maintainable class, ,, ,,the maintainedobject-id is the name of the ConceptScheme (conceptScheme-id) which the artefact belongs to;
--* if the artefact is a ,,ConceptScheme,,, which is a maintainable class, ,, ,,the maintainedobject-id is the name of the ConceptScheme (conceptScheme-id);
--* if the artefact is a ,,Codelist, ,,which is a maintainable class,  the maintainedobject-id is the Codelist name (codelist-id).
++* if the artefact is a Dataflow, which is a maintainable class,  the maintainedobject-id is the Dataflow name (dataflow-id);
++* if the artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure or DataAttribute, which are not maintainable and belong to the DataStructure maintainable class, the maintainedobject-id is the name of the DataStructure (dataStructure-id) which the artefact belongs to;
++* if the artefact is a Concept, which is not maintainable and belongs to the ConceptScheme maintainable class, ,, ,,the maintainedobject-id is the name of the ConceptScheme (conceptScheme-id) which the artefact belongs to;
++* if the artefact is a ConceptScheme, which is a maintainable class, ,, ,,the maintainedobject-id is the name of the ConceptScheme (conceptScheme-id);
++* if the artefact is a Codelist, which is a maintainable class,  the maintainedobject-id is the Codelist name (codelist-id).
  The **maintainedobject-version** is the version of the maintained object which the artefact belongs to (for example, possible versions are 1.0, 2.1, 3.1.2).
@@ -1247,18 +1247,13 @@
  The **object-id** is the name of the non-maintainable artefact (when the artefact is maintainable its name is already specified as the maintainedobject-id, see above), in particular it has to be specified:
--* if the artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure or DataAttribute  (the object-id is the name of one of
++* if the artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure or DataAttribute  (the object-id is the name of one of the artefacts above, which are data structure components)
++* if the artefact is a Concept (the object-id is the name of the Concept)
--the artefacts above, which are data structure components)
++For example, by using the URN, the VTL transformation that sums two SDMX dataflows DF1 and DF2 and assigns the result to a third persistent dataflow DFR, assuming that DF1, DF2  and  DFR are the maintainedobject-id of the three dataflows, that their version is 1.0 and their Agency is AG, would be written as[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[10~]^^>>path:#_ftn10]](%%):
--* if the artefact is a ,,Concept ,,(the object-id is the name of the ,,Concept,,)
--
--For example, by using the URN, the VTL transformation that sums two SDMX dataflows DF1 and DF2 and assigns the result to a third persistent dataflow DFR, assuming that DF1, DF2  and  DFR are the maintainedobject-id of the three dataflows, that their version is 1.0 and their Agency is AG, would be written as[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[10~]^^>>path:#_ftn10]](%%):
--
  ‘urn:sdmx:org.sdmx.infomodel.datastructure.Dataflow=AG:DFR(1.0)’  <-
--
  ‘urn:sdmx:org.sdmx.infomodel.datastructure.Dataflow=AG:DF1(1.0)’   +
--
  ‘urn:sdmx:org.sdmx.infomodel.datastructure.Dataflow=AG:DF2(1.0)’
  === 10.2.3 Abbreviation of the URN ===
@@ -1271,22 +1271,20 @@
  * The **SDMX-IM-package-name **can be omitted as well because it can be deduced from the class-name that follows it (the table of the SDMX-IM packages and classes that allows this deduction is in the SDMX 2.1 Standards - Section 5 -  Registry Specifications, paragraph 6.2.3). In particular, considering the object classes of the artefacts that VTL can reference, the package is:
  ** “datastructure” for the classes Dataflow, Dimension, MeasureDimension, TimeDimension, PrimaryMeasure, DataAttribute,
  ** “conceptscheme” for the classes  Concept and ConceptScheme o “codelist” for the class Codelist.
--* The **class-name** can be omitted as it can be deduced from the VTL invocation.  In particular, starting from the VTL class of the invoked artefact (e.g. dataset, component, identifier, measure, attribute, variable, valuedomain),  which is known given the syntax of the invoking VTL operator[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[11~]^^>>path:#_ftn11]](%%), the SDMX class can be deduced from the mapping rules between VTL and SDMX (see the section “Mapping between VTL and SDMX” hereinafter)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[12~]^^>>path:#_ftn12]](%%).
--* If the **agency-id** is not specified, it is assumed by default equal to the agency-id of the TransformationScheme, UserDefinedOperatorScheme or RulesetScheme  from which the artefact is invoked. For example, the agency-id can be omitted if it is the same as the invoking T,,ransformationScheme,, and cannot be omitted if the artefact comes from another agency.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[13~]^^>>path:#_ftn13]](%%)  Take also into account that, according to the VTL consistency rules, the agency of the result of a ,,Transformation,, must be the same as its ,,TransformationScheme,,, therefore the agency-id can be omitted for all the results (left part of ,,Transformation,, statements).
--* As for the **maintainedobject-id**, this is essential in some cases while in other cases it can be omitted: o if the referenced artefact is a ,,Dataflow,,, which is a maintainable class, the maintainedobject-id is the dataflow-id and obviously cannot be omitted;
--** if the referenced artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure, DataAttribute, which are not maintainable and belong to the ,,DataStructure,, maintainable class, the maintainedobject-id is the dataStructure-id and can be omitted, given that these components are always invoked within the invocation of a ,,Dataflow,,, whose dataStructure-id can be deduced from the
++* The **class-name** can be omitted as it can be deduced from the VTL invocation.  In particular, starting from the VTL class of the invoked artefact (e.g. dataset, component, identifier, measure, attribute, variable, valuedomain),  which is known given the syntax of the invoking VTL operator[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[11~]^^>>path:#_ftn11]](%%), the SDMX class can be deduced from the mapping rules between VTL and SDMX (see the section “Mapping between VTL and SDMX” hereinafter)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[12~]^^>>path:#_ftn12]](%%).
++* If the **agency-id** is not specified, it is assumed by default equal to the agency-id of the TransformationScheme, UserDefinedOperatorScheme or RulesetScheme  from which the artefact is invoked. For example, the agency-id can be omitted if it is the same as the invoking TransformationScheme and cannot be omitted if the artefact comes from another agency.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[13~]^^>>path:#_ftn13]](%%)  Take also into account that, according to the VTL consistency rules, the agency of the result of a Transformation must be the same as its TransformationScheme, therefore the agency-id can be omitted for all the results (left part of Transformation statements).
++* As for the **maintainedobject-id**, this is essential in some cases while in other cases it can be omitted: o if the referenced artefact is a Dataflow, which is a maintainable class, the maintainedobject-id is the dataflow-id and obviously cannot be omitted;
++** if the referenced artefact is a Dimension, MeasureDimension, TimeDimension, PrimaryMeasure, DataAttribute, which are not maintainable and belong to the DataStructure maintainable class, the maintainedobject-id is the dataStructure-id and can be omitted, given that these components are always invoked within the invocation of a Dataflow, whose dataStructure-id can be deduced from the
--SDMX structural definitions;  o if the referenced artefact is a ,,Concept, ,,which is not maintainable and belong to the ,,ConceptScheme ,,maintainable class,,, ,,the maintained object is the conceptScheme-id and cannot be omitted;
++SDMX structural definitions;  o if the referenced artefact is a Concept, which is not maintainable and belong to the ConceptScheme maintainable class,,, ,,the maintained object is the conceptScheme-id and cannot be omitted;
--*
--** if the referenced artefact is a ,,ConceptScheme, ,,which is a,, ,,maintainable class,,, ,,the maintained object is the ,,conceptScheme-id,, and obviously cannot be omitted;
--** if the referenced artefact is a ,,Codelist, ,,which is a maintainable class, the maintainedobject-id is the ,,codelist-id,, and obviously cannot be omitted.
++*
++** if the referenced artefact is a ConceptScheme, which is a,, ,,maintainable class,,, ,,the maintained object is the conceptScheme-id and obviously cannot be omitted;
++** if the referenced artefact is a Codelist, which is a maintainable class, the maintainedobject-id is the codelist-id and obviously cannot be omitted.
  * When the maintainedobject-id is omitted, the **maintainedobject-version** is omitted too. When the maintainedobject-id is not omitted and the maintainedobject-version is omitted, the version 1.0 is assumed by default.,, ,,
  * As said, the **container-object-id** does not apply to the classes that can be referenced in VTL transformations, therefore is not present in their URN
--* The **object-id** does not exist for the artefacts belonging to the ,,Dataflow, ConceptScheme,, and ,,Codelist,, classes, while it exists and cannot be omitted for the artefacts belonging to the classes Dimension, MeasureDimension, TimeDimension, PrimaryMeasure, DataAttribute and Concept, as for
++* The **object-id** does not exist for the artefacts belonging to the Dataflow, ConceptScheme and Codelist classes, while it exists and cannot be omitted for the artefacts belonging to the classes Dimension, MeasureDimension, TimeDimension, PrimaryMeasure, DataAttribute and Concept, as for them the object-id is the main identifier of the artefact
--them the object-id is the main identifier of the artefact
--
  The simplified object identifier is obtained by omitting all the first part of the URN, including the special characters, till the first part not omitted.
  For example, the full formulation that uses the complete URN shown at the end of the previous paragraph:
@@ -1299,11 +1299,11 @@
  DFR  :=  DF1 + DF2
--The references to the ,,Codelists,, can be simplified similarly. For example, given the non-abbreviated reference to the ,,Codelist,,  AG:CL_FREQ(1.0), which is[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[14~]^^>>path:#_ftn14]](%%):
++The references to the Codelists can be simplified similarly. For example, given the non-abbreviated reference to the Codelist  AG:CL_FREQ(1.0), which is[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[14~]^^>>path:#_ftn14]](%%):
  ‘urn:sdmx:org.sdmx.infomodel.codelist.Codelist=AG:CL_FREQ(1.0)’
--if the ,,Codelist,, is referenced from a ruleset scheme belonging to the agency AG, omitting all the optional parts, the abbreviated reference would become simply[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[15~]^^>>path:#_ftn15]](%%):
++if the Codelist is referenced from a ruleset scheme belonging to the agency AG, omitting all the optional parts, the abbreviated reference would become simply[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[15~]^^>>path:#_ftn15]](%%):
  CL_FREQ
@@ -1313,7 +1313,7 @@
  SECTOR
--For example, the transformation for renaming the component SECTOR of the dataflow DF1 into SEC can be written as[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[16~]^^>>path:#_ftn16]](%%):
++For example, the transformation for renaming the component SECTOR of the dataflow DF1 into SEC can be written as[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[16~]^^>>path:#_ftn16]](%%):
  ‘DFR(1.0)’ := ‘DF1(1.0)’ [rename SECTOR to SEC]
@@ -1347,9 +1347,9 @@
  The VTL Rulesets have a signature, in which the Value Domains or the Variables on which the Ruleset is defined are declared, and a body, which contains the rules.
--In the signature, given the mapping between VTL and SDMX better described in the following paragraphs, a reference to a VTL Value Domain becomes a reference to a SDMX Codelist or to a SDMX ConceptScheme (for SDMX measure dimensions), while a reference to a VTL Represented Variable becomes a reference to a SDMX Concept, assuming for it a definite representation[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[17~]^^>>path:#_ftn17]](%%).
++In the signature, given the mapping between VTL and SDMX better described in the following paragraphs, a reference to a VTL Value Domain becomes a reference to a SDMX Codelist or to a SDMX ConceptScheme (for SDMX measure dimensions), while a reference to a VTL Represented Variable becomes a reference to a SDMX Concept, assuming for it a definite representation[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[17~]^^>>path:#_ftn17]](%%).
--In general, for referencing SDMX Codelists and Concepts, the conventions described in the previous paragraphs apply. In the Ruleset syntax, the elements that reference SDMX artefacts are called “valueDomain” and “variable” for the Datapoint Rulesets and “ruleValueDomain”, “ruleVariable”, “condValueDomain” “condVariable” for the Hierarchical Rulesets). The syntax of the Ruleset signature allows also to define aliases of the elements above, these aliases are valid only within the specific ruleset definition statement and cannot be mapped to SDMX.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[18~]^^>>path:#_ftn18]](%%)
++In general, for referencing SDMX Codelists and Concepts, the conventions described in the previous paragraphs apply. In the Ruleset syntax, the elements that reference SDMX artefacts are called “valueDomain” and “variable” for the Datapoint Rulesets and “ruleValueDomain”, “ruleVariable”, “condValueDomain” “condVariable” for the Hierarchical Rulesets). The syntax of the Ruleset signature allows also to define aliases of the elements above, these aliases are valid only within the specific ruleset definition statement and cannot be mapped to SDMX.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[18~]^^>>path:#_ftn18]](%%)
  In the body of the Rulesets, the Codes and in general all the Values can be written without any other specification, because the artefact  which the Values are referred (Codelist, ConceptScheme, Concept) to can be deduced from the Ruleset signature.
@@ -1363,15 +1363,15 @@
  Every time a SDMX object is referenced in a VTL Transformation as an input operand, there is the need to generate a VTL definition of the object, so that the VTL operations can take place. This can be made starting from the SDMX definition and applying a SDMX-VTL mapping method in the direction from SDMX to VTL. The possible mapping methods from SDMX to VTL are described in the following paragraphs and are conceived to allow the automatic deduction of the VTL definition of the object from the knowledge of the SDMX definition.
--In the opposite direction, every time an object calculated by means of VTL must be treated as a SDMX object (for example for exchanging it through SDMX), there is the need of a SDMX definition of the object, so that the SDMX operations can take place.  The SDMX definition is needed for the VTL objects for which a SDMX use is envisaged[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[19~]^^>>path:#_ftn19]](%%).
++In the opposite direction, every time an object calculated by means of VTL must be treated as a SDMX object (for example for exchanging it through SDMX), there is the need of a SDMX definition of the object, so that the SDMX operations can take place.  The SDMX definition is needed for the VTL objects for which a SDMX use is envisaged[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[19~]^^>>path:#_ftn19]](%%).
  The mapping methods from VTL to SDMX are described in the following paragraphs as well, however they do not allow the complete SDMX definition to be automatically deduced from the VTL definition,  more than all because the former typically contains additional information in respect to the latter. For example, the definition of a SDMX DSD includes also some mandatory information not available in VTL (like the concept scheme to which the SDMX components refer, the assignmentStatus and attributeRelationship for the DataAttributes and so on). Therefore the mapping methods from VTL to SDMX provide only a general guidance for generating SDMX definitions properly starting from the information available in VTL, independently of how the SDMX definition it is actually generated (manually, automatically or part and part).
  === 10.3.2 General mapping of VTL and SDMX data structures ===
--This section makes reference to the VTL “Model for data and their structure”[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[20~]^^>>path:#_ftn20]](%%) and the correspondent SDMX “Data Structure Definition”[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[21~]^^>>path:#_ftn21]](%%).
++This section makes reference to the VTL “Model for data and their structure”[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[20~]^^>>path:#_ftn20]](%%) and the correspondent SDMX “Data Structure Definition”[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[21~]^^>>path:#_ftn21]](%%).
--The main type of artefact that the VTL can manipulate is the VTL Data Set, which in general is mapped to the SDMX Dataflow. This means that a VTL Transformation, in the SDMX context, expresses the algorithm for calculating a derived Dataflow starting from some already existing Dataflows (either collected or derived).[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[22~]^^>>path:#_ftn22]](%%)
++The main type of artefact that the VTL can manipulate is the VTL Data Set, which in general is mapped to the SDMX Dataflow. This means that a VTL Transformation, in the SDMX context, expresses the algorithm for calculating a derived Dataflow starting from some already existing Dataflows (either collected or derived).[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[22~]^^>>path:#_ftn22]](%%)
  While the VTL Transformations are defined in term of Dataflow definitions, they are assumed to be executed on instances of such Dataflows, provided at runtime to the VTL engine (the mechanism for identifying the instances to be processed are not part of the VTL specifications and depend on the implementation of the VTL-based systems).  As already said, the SDMX Datasets are instances of SDMX Dataflows, therefore a VTL Transformation defined on some SDMX Dataflows can be applied on some corresponding SDMX Datasets.
@@ -1381,7 +1381,7 @@
  SDMX DimensionComponent can be a Dimension, a TimeDimension or a MeasureDimension. Correspondingly, in the SDMX implementation of the VTL, the VTL Identifiers can be (optionally) distinguished in three sub-classes (Simple Identifier, Time Identifier, Measure Identifier) even if such a distinction is not evidenced in the VTL IM.
--However, a VTL Data Structure can have any number of Identifiers, Measures and Attributes, while a SDMX 2.1 DataStructureDefinition can have any number of Dimensions and DataAttributes but just one PrimaryMeasure[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[23~]^^>>path:#_ftn23]](%%). This is due to a difference between SDMX 2.1 and VTL in the possible representation methods of the data that contain more measures.
++However, a VTL Data Structure can have any number of Identifiers, Measures and Attributes, while a SDMX 2.1 DataStructureDefinition can have any number of Dimensions and DataAttributes but just one PrimaryMeasure[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[23~]^^>>path:#_ftn23]](%%). This is due to a difference between SDMX 2.1 and VTL in the possible representation methods of the data that contain more measures.
  As for SDMX, because the data structure cannot contain more than one measure component (i.e., the primaryMeasure), the representation of data having more measures is possible only by means of a particular dimension, called MeasureDimension, which is aimed at containing the name of the measure concepts, so that for each observation the value contained in the PrimaryMeasure component is the value of the measure concept reported in the MeasureDimension component.
@@ -1391,28 +1391,25 @@
  === 10.3.3 Mapping from SDMX to VTL data structures ===
--**10.3.3.1 Basic Mapping **
++==== 10.3.3.1 Basic Mapping** ** ====
  The main mapping method from SDMX to VTL is called **Basic **mapping. This is considered as the default mapping method and is applied unless a different method is specified through the VtlMappingScheme and VtlDataflowMapping classes. 1842 When transforming **from SDMX to VTL**, this method consists in leaving the 1843 components unchanged and maintaining their names and roles, according to the 1844 following table:
--|SDMX|VTL
--|Dimension|(Simple) Identifier
--|Time Dimension|(Time) Identifier
--|Measure Dimension|(Measure) Identifier
--|Primary Measure|Measure
--|Data Attribute|Attribute
++(% style="width:636.294px" %)
++|(% style="width:286px" %)**SDMX**|(% style="width:347px" %)**VTL**
++|(% style="width:286px" %)Dimension|(% style="width:347px" %)(Simple) Identifier
++|(% style="width:286px" %)Time Dimension|(% style="width:347px" %)(Time) Identifier
++|(% style="width:286px" %)Measure Dimension|(% style="width:347px" %)(Measure) Identifier
++|(% style="width:286px" %)Primary Measure|(% style="width:347px" %)Measure
++|(% style="width:286px" %)Data Attribute|(% style="width:347px" %)Attribute
--According to this method, the resulting VTL structures are always mono-measure
++According to this method, the resulting VTL structures are always mono-measure (i.e., they have just one measure component) and their Measure is the SDMX PrimaryMeasure. Nevertheless, if the SDMX data structure has a MeasureDimension, which can convey the name of one or more measure concepts, such unique measure component can contain the value of more (conceptual) measures (one for each observation).
--(i.e., they have just one measure component) and their Measure is the SDMX
--
--PrimaryMeasure. Nevertheless, if the SDMX data structure has a MeasureDimension, which can convey the name of one or more measure concepts, such unique measure component can contain the value of more (conceptual) measures (one for each observation).
--
  As for the SDMX DataAttributes, in VTL they are all considered “at data point / observation level” (i.e. dependent on all the VTL Identifiers), because VTL does not have the SDMX AttributeRelationships, which defines the construct to which the DataAttribute is related (e.g. observation, dimension or set or group of dimensions, whole data set).
  With the Basic mapping, one SDMX observation generates one VTL data point.
--**10.3.3.2 Pivot Mapping **
++==== 10.3.3.2 Pivot Mapping ====
  An alternative mapping method from SDMX to VTL is the **Pivot **mapping, which is different from the Basic method only for the SDMX data structures that contain a MeasureDimension, which are mapped to multi-measure VTL data structures.
@@ -1432,29 +1432,27 @@
  The summary mapping table of the “pivot” mapping from SDMX to VTL for the SDMX data structures that contain a MeasureDimension is the following:
--|SDMX|VTL
--|Dimension|(Simple) Identifier
--|TimeDimension|(Time) Identifier
--|MeasureDimension & PrimaryMeasure|One Measure for each Concept of the SDMX Measure Dimension
--|DataAttribute not depending on the MeasureDimension|Attribute
--|DataAttribute depending on the MeasureDimension|One Attribute for each Concept of the SDMX Measure Dimension
++(% style="width:941.294px" %)
++|(% style="width:441px" %)**SDMX**|(% style="width:497px" %)**VTL**
++|(% style="width:441px" %)Dimension|(% style="width:497px" %)(Simple) Identifier
++|(% style="width:441px" %)TimeDimension|(% style="width:497px" %)(Time) Identifier
++|(% style="width:441px" %)MeasureDimension & PrimaryMeasure|(% style="width:497px" %)One Measure for each Concept of the SDMX Measure Dimension
++|(% style="width:441px" %)DataAttribute not depending on the MeasureDimension|(% style="width:497px" %)Attribute
++|(% style="width:441px" %)DataAttribute depending on the MeasureDimension|(% style="width:497px" %)One Attribute for each Concept of the SDMX Measure Dimension
--Using this mapping method, the components of the data structure can change in the conversion from SDMX to VTL and it must be taken into account that the VTL 1908 statements can reference only the components of the resulting VTL data structure.
++Using this mapping method, the components of the data structure can change in the conversion from SDMX to VTL and it must be taken into account that the VTL statements can reference only the components of the resulting VTL data structure.
--At observation / data point level, calling Cj (j=1, … n) the j^^th^^ Concept of the 1911 MeasureDimension:
++At observation / data point level, calling Cj (j=1, … n) the j^^th^^ Concept of the MeasureDimension:
-- The set of SDMX observations having the same values for all the Dimensions except than the MeasureDimension become one multi-measure VTL Data Point, having one Measure for each Concept Cj of the SDMX MeasureDimension;
++* The set of SDMX observations having the same values for all the Dimensions except than the MeasureDimension become one multi-measure VTL Data Point, having one Measure for each Concept Cj of the SDMX MeasureDimension;
++* The values of the SDMX simple Dimensions, TimeDimension and DataAttributes not depending on the MeasureDimension (these components by definition have always the same values for all the observations of the set above) become the values of the corresponding VTL (simple) Identifiers, (time) Identifier and Attributes.
++* The value of the PrimaryMeasure of the SDMX observation belonging to the set above and having MeasureDimension=Cj becomes the value of the VTL Measure Cj
++* For the SDMX DataAttributes depending on the MeasureDimension, the value of the DataAttribute DA of the SDMX observation belonging to the set above and having MeasureDimension=Cj becomes the value of the VTL Attribute DA_Cj
--*
--** The values of the SDMX simple Dimensions, TimeDimension and DataAttributes not depending on the MeasureDimension (these components by definition have always the same values for all the observations of the set above) become the values of the corresponding VTL (simple) Identifiers, (time) Identifier and Attributes.
--** The value of the PrimaryMeasure of the SDMX observation belonging to the set above and having MeasureDimension=Cj becomes the value of the VTL Measure Cj
--** For the SDMX DataAttributes depending on the MeasureDimension, the value of the DataAttribute DA of the SDMX observation belonging to the set above and having MeasureDimension=Cj becomes the value of the VTL Attribute DA_Cj
++==== 10.3.3.3 From SDMX DataAttributes to VTL Measures ====
--**10.3.3.3 From SDMX DataAttributes to VTL Measures **
++* In some cases it may happen that the DataAttributes of the SDMX DataStructure need to be managed as Measures in VTL. Therefore, a variant of both the methods above consists in transforming all the SDMX DataAttributes in VTL Measures. When DataAttributes are converted to Measures, the  two methods above are called Basic_A2M and Pivot_A2M (the suffix “A2M” stands for Attributes to Measures). Obviously, the resulting VTL data structure is, in general, multi-measure and does not contain Attributes.
--*
--** In some cases it may happen that the DataAttributes of the SDMX DataStructure need to be managed as Measures in VTL. Therefore, a variant of both the methods above consists in transforming all the SDMX DataAttributes in VTL Measures. When DataAttributes are converted to Measures, the  two methods above are called Basic_A2M and Pivot_A2M (the suffix “A2M” stands for Attributes to Measures). Obviously, the resulting VTL data structure is, in general, multi-measure and does not contain Attributes.
--
  The Basic_A2M and Pivot_A2M behaves respectively like the Basic and Pivot methods, except that the final VTL components, which according to the Basic and Pivot methods would have had the role of Attribute, assume instead the role of Measure.
  Proper VTL features allow changing the role of specific attributes even after the SDMX to VTL mapping: they can be useful when only some of the DataAttributes need to be managed as VTL Measures.
@@ -1461,7 +1461,7 @@
  === 10.3.4 Mapping from VTL to SDMX data structures ===
--**10.3.4.1 Basic Mapping **
++==== 10.3.4.1 Basic Mapping** ** ====
  The main mapping method **from VTL to SDMX** is called **Basic **mapping as well.
@@ -1469,20 +1469,19 @@
  The method consists in leaving the components unchanged and maintaining their names and roles in SDMX, according to the following mapping table, which is the same as the basic mapping from SDMX to VTL, only seen in the opposite direction.
--This mapping method cannot be applied for SDMX 2.1 if the VTL data structure has more than one measure component, given that the SDMX 2.1 DataStructureDefinition allows just one measure component (the
++This mapping method cannot be applied for SDMX 2.1 if the VTL data structure has more than one measure component, given that the SDMX 2.1 DataStructureDefinition allows just one measure component (the PrimaryMeasure). In this case it becomes mandatory to specify a different mapping method through the VtlMappingScheme and VtlDataflowMapping classes.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[24~]^^>>path:#_ftn24]](%%)
--PrimaryMeasure). In this case it becomes mandatory to specify a different 1958 mapping method through the VtlMappingScheme and VtlDataflowMapping 1959 classes.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[24~]^^>>path:#_ftn24]](%%)
++Please note that the VTL measures can have any name while in SDMX 2.1 the MeasureComponent has the mandatory name “obs_value”, therefore the name of the VTL measure name must become “obs_value” in SDMX 2.1.
--1960 Please note that the VTL measures can have any name while in SDMX 2.1 the 1961 MeasureComponent has the mandatory name “obs_value”, therefore the name of the VTL measure name must become “obs_value” in SDMX 2.1.
--
  Mapping table:
--|VTL|SDMX
--|(Simple) Identifier|Dimension
--|(Time) Identifier|TimeDimension
--|(Measure) Identifier|MeasureDimension
--|Measure|PrimaryMeasure
--|Attribute|DataAttribute
++(% style="width:592.294px" %)
++|(% style="width:253px" %)**VTL**|(% style="width:336px" %)**SDMX**
++|(% style="width:253px" %)(Simple) Identifier|(% style="width:336px" %)Dimension
++|(% style="width:253px" %)(Time) Identifier|(% style="width:336px" %)TimeDimension
++|(% style="width:253px" %)(Measure) Identifier|(% style="width:336px" %)MeasureDimension
++|(% style="width:253px" %)Measure|(% style="width:336px" %)PrimaryMeasure
++|(% style="width:253px" %)Attribute|(% style="width:336px" %)DataAttribute
  If the distinction between simple identifier, time identifier and measure identifier is not maintained in the VTL environment, the classification between Dimension, TimeDimension and MeasureDimension exists only in SDMX, as declared in the relevant DataStructureDefinition.
@@ -1492,14 +1492,12 @@
  As  said, the resulting SDMX definitions must be compliant with the SDMX consistency rules. For example, the SDMX DSD must have the assignmentStatus,  which does not exist in VTL, the AttributeRelationship for the DataAttributes and so on.
--**10.3.4.2 Unpivot Mapping **
++==== 10.3.4.2 Unpivot Mapping ====
  An alternative mapping method from VTL to SDMX is the **Unpivot **mapping.
--Although this mapping method can be used in any case, it makes major sense in case the VTL data structure has more than one measure component (multi-measures VTL structure). For such VTL structures, in fact, the basic method cannot be applied, given that by maintaining the data structure unchanged the resulting SDMX data structure would have more than one measure component, which is not allowed by SDMX 2.1 (it allows just one measure component, the PrimaryMeasure, called
++Although this mapping method can be used in any case, it makes major sense in case the VTL data structure has more than one measure component (multi-measures VTL structure). For such VTL structures, in fact, the basic method cannot be applied, given that by maintaining the data structure unchanged the resulting SDMX data structure would have more than one measure component, which is not allowed by SDMX 2.1 (it allows just one measure component, the PrimaryMeasure, called “obs_value”).
--“obs_value”).
--
  The multi-measures VTL structures have not a Measure Identifier (because the Measures are separate components) and need to be converted to SDMX dataflows having an added MeasureDimension which disambiguates the multiple measures, and an added PrimaryMeasure, in which the measures’ values are maintained.
  The **unpivot** mapping behaves like follows:
@@ -1515,34 +1515,25 @@
  The summary mapping table of the **unpivot** mapping method is the following:
--
--|VTL|SDMX
--|(Simple) Identifier|Dimension
--|(Time) Identifier|TimeDimension
--|All Measure Components|(((
--MeasureDimension (having one Measure Concept for each VTL measure component) &
--
--PrimaryMeasure
++(% style="width:904.294px" %)
++|(% style="width:368px" %)**VTL**|(% style="width:533px" %)**SDMX**
++|(% style="width:368px" %)(Simple) Identifier|(% style="width:533px" %)Dimension
++|(% style="width:368px" %)(Time) Identifier|(% style="width:533px" %)TimeDimension
++|(% style="width:368px" %)All Measure Components|(% style="width:533px" %)(((
++MeasureDimension (having one Measure Concept for each VTL measure component) & PrimaryMeasure
  )))
--|Attribute |(((
--DataAttribute depending on all
--
--SDMX Dimensions including the
--
--TimeDimension and except the MeasureDimension
++|(% style="width:368px" %)Attribute |(% style="width:533px" %)(((
++DataAttribute depending on all SDMX Dimensions including the TimeDimension and except the MeasureDimension
  )))
  At observation / data point level:
-- a multi-measure VTL Data Point becomes a set of SDMX observations, one for each VTL measure
++* a multi-measure VTL Data Point becomes a set of SDMX observations, one for each VTL measure
++* the values of the VTL identifiers become the values of the corresponding SDMX Dimensions, for all the observations of the set above
++* the name of the j^^th^^ VTL measure (e.g. “Cj”) becomes the value of the SDMX MeasureDimension of the j^^th^^ observation of the set (i.e. the Concept Cj)
++* the value of the j^^th^^ VTL measure becomes the value of the SDMX PrimaryMeasure of the j^^th^^ observation of the set
++* the values of the VTL Attributes become the values of the corresponding SDMX DataAttributes (in principle for all the observations of the set above)
-- the values of the VTL identifiers become the values of the corresponding SDMX Dimensions, for all the observations of the set above
--
--*
--** the name of the j^^th^^ VTL measure (e.g. “Cj”) becomes the value of the SDMX MeasureDimension of the j^^th^^ observation of the set (i.e. the Concept Cj)
--** the value of the j^^th^^ VTL measure becomes the value of the SDMX PrimaryMeasure of the j^^th^^ observation of the set
--** the values of the VTL Attributes become the values of the corresponding SDMX DataAttributes (in principle for all the observations of the set above)
--
  If desired, this method can be applied also to mono-measure VTL structures, provided that none of the VTL components has already the role of measure identifier.
  Like in the general case, a MeasureDimension component called “measure_name” would be added to the SDMX DataStructure and would have just one possible measure concept, corresponding to the unique VTL measure. The original VTL measure component would not become a Component in the SDMX data structure. The value of the VTL measure would be assigned to the SDMX PrimaryMeasure called “obs_value”.
@@ -1549,29 +1549,31 @@
  In any case, the resulting SDMX definitions must be compliant with the SDMX consistency rules. For example, the possible Concepts of the SDMX MeasureDimension need to be listed in a SDMX ConceptScheme, with proper id, agency and version; moreover, the SDMX DSD must have the assignmentStatus, which does not exist in VTL, the attributeRelationship for the DataAttributes and so on.
--**10.3.4.3 From VTL Measures to SDMX Data Attributes **
++==== 10.3.4.3 From VTL Measures to SDMX Data Attributes** ** ====
  For the multi-measure VTL structures (having more than one Measure Component), it may happen that the Measures of the VTL Data Structure need to be managed as DataAttributes in SDMX. Therefore a third mapping method consists in transforming one VTL measure in the SDMX primaryMeasure and all the other VTL Measures in SDMX DataAttributes. This method is called M2A (“M2A” stands for “Measures to DataAttributes”).
  When applied to mono-measure VTL structures (having one Measure component), the M2A method behaves like the Basic mapping (the VTL Measure component becomes the SDMX primary measure “obs_value”, there is no additional VTL measure to be converted to SDMX DataAttribute). Therefore the mapping table is the same as for the Basic method:
--|VTL|SDMX
--|(Simple) Identifier|Dimension
--|(Time) Identifier|TimeDimension
--|(Measure) Identifier (if any)|MeasureDimension
--|Measure|PrimaryMeasure
--|Attribute|DataAttribute
++(% style="width:591.294px" %)
++|(% style="width:252px" %)**VTL**|(% style="width:336px" %)**SDMX**
++|(% style="width:252px" %)(Simple) Identifier|(% style="width:336px" %)Dimension
++|(% style="width:252px" %)(Time) Identifier|(% style="width:336px" %)TimeDimension
++|(% style="width:252px" %)(Measure) Identifier (if any)|(% style="width:336px" %)MeasureDimension
++|(% style="width:252px" %)Measure|(% style="width:336px" %)PrimaryMeasure
++|(% style="width:252px" %)Attribute|(% style="width:336px" %)DataAttribute
  For multi-measure VTL structures (having more than one Measure component), one VTL Measure becomes the SDMX PrimaryMeasure while the other VTL Measures maintain their names and values but assume the role of DataAttribute in SDMX. The choice of the VTL Measure that correspond to the SDMX PrimaryMeasure is  left to the definer of the SDMX data structure definition.
--2Taking into account that the multi-measure VTL structures do not have a measure 2073 identifier, the mapping table is the following:
++Taking into account that the multi-measure VTL structures do not have a measure identifier, the mapping table is the following:
--|VTL|SDMX
--|(Simple) Identifier|Dimension
--|(Time) Identifier|TimeDimension
--|One of the Measures|PrimaryMeasure
--|Other Measures|DataAttribute
--|Attribute|DataAttribute
++(% style="width:588.294px" %)
++|(% style="width:259px" %)**VTL**|(% style="width:326px" %)**SDMX**
++|(% style="width:259px" %)(Simple) Identifier|(% style="width:326px" %)Dimension
++|(% style="width:259px" %)(Time) Identifier|(% style="width:326px" %)TimeDimension
++|(% style="width:259px" %)One of the Measures|(% style="width:326px" %)PrimaryMeasure
++|(% style="width:259px" %)Other Measures|(% style="width:326px" %)DataAttribute
++|(% style="width:259px" %)Attribute|(% style="width:326px" %)DataAttribute
  Even in this case, the resulting SDMX definitions must be compliant with the SDMX consistency rules. For example, the SDMX DSD must have the assignmentStatus,  which does not exist in VTL, the attributeRelationship for the DataAttributes and so on. In particular, the primaryMeasure of the SDMX 2.1 DSD must be called “obs_value” and must be one of the VTL Measures, chosen by the DSD definer.
@@ -1579,7 +1579,6 @@
  In order to define and understand properly VTL transformations, the applied mapping methods must be specified in the SDMX structural metadata. If the default mapping method (Basic) is applied, no specification is needed.
--
  A customized mapping can be defined through the VtlMappingScheme and VtlDataflowMapping classes (see the section of the SDMX IM relevant to the VTL). A VtlDataflowMapping allows specifying the mapping methods to be used for a specific dataflow, both in the direction from SDMX to VTL (toVtlMappingMethod) and from VTL to SDMX (fromVtlMappingMethod); in fact a VtlDataflowMapping associates the structured URN that identifies a SDMX dataflow to its VTL alias and its mapping methods.
  It is possible to specify the toVtlMappingMethod and fromVtlMappingMethod also for the conventional dataflow called “generic_dataflow”: in this case the specified mapping methods are intended to become the default ones, overriding the
@@ -1588,35 +1588,28 @@
   The VtlMappingScheme is a container for zero or more VtlDataflowMapping (besides possible mappings to artefacts other than dataflows).
--=== 10.3.6 Mapping dataflow subsets to distinct VTL data sets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^**~[25~]**^^>>path:#_ftn25]](%%) ===
++=== 10.3.6 Mapping dataflow subsets to distinct VTL data sets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^**~[25~]**^^>>path:#_ftn25]](%%) ===
  Until now it as been assumed to map one SMDX Dataflow to one VTL dataset and vice-versa. This mapping one-to-one is not mandatory according to VTL because a VTL data set is meant to be a set of observations (data points) on a logical plane, having the same logical data structure and the same general meaning, independently of the possible physical representation or storage (see VTL 2.0 User Manual page
 ), therefore a SDMX Dataflow can be seen either as a unique set of data observations (corresponding to one VTL data set) or as the union of many sets of data observations (each one corresponding to a distinct VTL data set).
--As a matter of fact, in some cases it can be useful to define VTL operations involving definite parts of a SDMX Dataflow instead than the whole.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[26~]^^>>path:#_ftn26]](%%)
++As a matter of fact, in some cases it can be useful to define VTL operations involving definite parts of a SDMX Dataflow instead than the whole.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[26~]^^>>path:#_ftn26]](%%)
--Therefore, in order to make the coding of  VTL operations simpler when applied on parts of SDMX Dataflows, it is allowed to map distinct parts of a SDMX Dataflow to distinct VTL data sets according to the following rules and conventions. This kind of mapping is possible both from SDMX to VTL and from VTL to SDMX, as better explained below.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[27~]^^>>path:#_ftn27]](%%)
++Therefore, in order to make the coding of  VTL operations simpler when applied on parts of SDMX Dataflows, it is allowed to map distinct parts of a SDMX Dataflow to distinct VTL data sets according to the following rules and conventions. This kind of mapping is possible both from SDMX to VTL and from VTL to SDMX, as better explained below.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[27~]^^>>path:#_ftn27]](%%)
--                   Given    a      SDMX Dataflow      and    some      predefined Dimensions      of    its
++Given a SDMX Dataflow and some predefined Dimensions of its DataStructure, it is allowed to map the subsets of observations that have the same combination of values for such Dimensions to correspondent VTL datasets.
--DataStructure, it is allowed to map the subsets of observations that have the same combination of values for such Dimensions to correspondent VTL datasets.
++For example, assuming that the SDMX dataflow DF1(1.0) has the Dimensions INDICATOR, TIME_PERIOD and COUNTRY, and that the user declares the Dimensions INDICATOR and COUNTRY as basis for the mapping (i.e. the mapping dimensions):  the observations that have the same values for INDICATOR and COUNTRY would be mapped to the same VTL dataset (and vice-versa).
--For example, assuming that the SDMX dataflow DF1(1.0) has the Dimensions INDICATOR, TIME_PERIOD and COUNTRY, and that the user declares the
--
--Dimensions INDICATOR and COUNTRY as basis for the mapping (i.e. the mapping dimensions):  the observations that have the same values for INDICATOR and COUNTRY would be mapped to the same VTL dataset (and vice-versa).
--
  In practice, this kind mapping is obtained like follows:
--* For a given SDMX dataflow, the user (VTL definer) declares  the dimension components on which the mapping will be based, in a given order.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[28~]^^>>path:#_ftn28]](%%) Following the example above, imagine that the user declares the dimensions INDICATOR and COUNTRY.
++* For a given SDMX dataflow, the user (VTL definer) declares  the dimension components on which the mapping will be based, in a given order.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[28~]^^>>path:#_ftn28]](%%) Following the example above, imagine that the user declares the dimensions INDICATOR and COUNTRY.
  * The VTL dataset is given a name using a special notation also called “ordered concatenation” and composed of the following parts:
--** The reference to the SDMX dataflow (expressed according to the rules described in the previous paragraphs, i.e. URN, abbreviated
++** The reference to the SDMX dataflow (expressed according to the rules described in the previous paragraphs, i.e. URN, abbreviated URN or another alias); for example DF(1.0);
++** a slash (“/”) as a separator; [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[29~]^^>>path:#_ftn29]]
++** The reference to a specific part of the SDMX dataflow above, expressed as the concatenation of the values that the SDMX dimensions declared above must have, separated by dots (“.”) and written in the order in which these dimensions are defined[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[30~]^^>>path:#_ftn30]](%%) . For example  POPULATION.USA would mean that such a VTL dataset is mapped to the SDMX observations for which the dimension  //INDICATOR// is equal to POPULATION and the dimension //COUNTRY// is equal to USA.
--URN or another alias); for example DF(1.0); o a slash (“/”) as a separator; [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[29~]^^>>path:#_ftn29]]
--
--*
--** The reference to a specific part of the SDMX dataflow above, expressed as the concatenation of the values that the SDMX dimensions declared above must have, separated by dots (“.”) and written in the order in which these dimensions are defined[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[30~]^^>>path:#_ftn30]](%%) . For example  POPULATION.USA would mean that such a VTL dataset is mapped to the SDMX observations for which the dimension  //INDICATOR// is equal to POPULATION and the dimension //COUNTRY// is equal to USA.
--
  In the VTL transformations, this kind of dataset name must be referenced between single quotes because the slash (“/”) is not a regular character according to the VTL rules.
  Therefore, the generic name of this kind of VTL datasets would be:
@@ -1633,7 +1633,7 @@
  Let us now analyse the different meaning of this kind of mapping in the two mapping directions, i.e. from SDMX to VTL and from VTL to SDMX.
--As already said, the mapping from SDMX to VTL happens when the VTL datasets are operand of VTL transformations, instead the mapping from VTL to SDMX happens when the VTL datasets are result of VTL transformations[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[31~]^^>>path:#_ftn31]](%%) and need to be treated as SDMX objects. This kind of mapping can be applied independently in the two directions and the Dimensions on which the mapping is based can be different in the two directions: these Dimensions are defined in the ToVtlSpaceKey and in the FromVtlSpaceKey classes respectively.
++As already said, the mapping from SDMX to VTL happens when the VTL datasets are operand of VTL transformations, instead the mapping from VTL to SDMX happens when the VTL datasets are result of VTL transformations[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[31~]^^>>path:#_ftn31]](%%) and need to be treated as SDMX objects. This kind of mapping can be applied independently in the two directions and the Dimensions on which the mapping is based can be different in the two directions: these Dimensions are defined in the ToVtlSpaceKey and in the FromVtlSpaceKey classes respectively.
  First, let us see what happens in the mapping direction from SDMX to VTL, i.e. when parts of a SDMX dataflow (e.g. DF1(1.0)) need to be mapped to distinct VTL datasets that are operand of some VTL transformations.
@@ -1643,7 +1643,7 @@
  //COUNTRYvalue//. For example, the VTL dataset ‘DF1(1.0)/POPULATION.USA’ would contain all the observations of DF1(1.0) having INDICATOR = POPULATION and COUNTRY = USA.
--In order to obtain the data structure of these VTL datasets from the SDMX one, it is assumed that the SDMX dimensions on which the mapping is based are dropped, i.e. not maintained in the VTL data structure; this is possible because their values are fixed for each one of the invoked VTL datasets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[32~]^^>>path:#_ftn32]](%%). After that, the mapping method from SDMX to VTL specified for the dataflow DF1(1.0) is applied (i.e. basic, pivot …).
++In order to obtain the data structure of these VTL datasets from the SDMX one, it is assumed that the SDMX dimensions on which the mapping is based are dropped, i.e. not maintained in the VTL data structure; this is possible because their values are fixed for each one of the invoked VTL datasets[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[32~]^^>>path:#_ftn32]](%%). After that, the mapping method from SDMX to VTL specified for the dataflow DF1(1.0) is applied (i.e. basic, pivot …).
  In the example above, for all the datasets of the kind
@@ -1663,7 +1663,7 @@
  …   …   …
--In fact the VTL operator “sub” has exactly the same behaviour. Therefore, mapping different parts of a SDMX dataflow to different VTL datasets in the direction from SDMX to VTL through the ordered concatenation notation is equivalent to a proper use of the operator “**sub**” on such a dataflow. [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[33~]^^>>path:#_ftn33]]
++In fact the VTL operator “sub” has exactly the same behaviour. Therefore, mapping different parts of a SDMX dataflow to different VTL datasets in the direction from SDMX to VTL through the ordered concatenation notation is equivalent to a proper use of the operator “**sub**” on such a dataflow. [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[33~]^^>>path:#_ftn33]]
  In the direction from SDMX to VTL it is allowed to omit the value of one or more Dimensions on which the mapping is based, but maintaining all the separating dots (therefore it may happen to find two or more consecutive dots and dots in the beginning or in the end). The absence of value means that for the corresponding Dimension all the values are kept and the Dimension is not dropped.
@@ -1686,12 +1686,12 @@
  For example, let us assume that the VTL programmer wants to calculate the SDMX dataflow DF2(1.0) having the Dimensions TIME_PERIOD, INDICATOR, and COUNTRY and that such a programmer finds it convenient to calculate separately the parts of DF2(1.0) that have different combinations of values for INDICATOR and COUNTRY:
--* each part is calculated as a  VTL derived dataset, result of a dedicated VTL transformation; [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[34~]^^>>path:#_ftn34]](%%)
--* the data structure of all these VTL datasets has the TIME_PERIOD identifier and does not have the INDICATOR and COUNTRY identifiers.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[35~]^^>>path:#_ftn35]]
++* each part is calculated as a  VTL derived dataset, result of a dedicated VTL transformation; [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[34~]^^>>path:#_ftn34]](%%)
++* the data structure of all these VTL datasets has the TIME_PERIOD identifier and does not have the INDICATOR and COUNTRY identifiers.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[35~]^^>>path:#_ftn35]]
--Under these hypothesis, such derived VTL datasets can be mapped to DF2(1.0) by declaring the Dimensions INDICATOR and COUNTRY as mapping dimensions[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[36~]^^>>path:#_ftn36]](%%).
++Under these hypothesis, such derived VTL datasets can be mapped to DF2(1.0) by declaring the Dimensions INDICATOR and COUNTRY as mapping dimensions[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[36~]^^>>path:#_ftn36]](%%).
--The corresponding VTL transformations, assuming that the result needs to be persistent, would be of this kind:^^ ^^[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[37~]^^>>path:#_ftn37]]
++The corresponding VTL transformations, assuming that the result needs to be persistent, would be of this kind:^^ ^^[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[37~]^^>>path:#_ftn37]]
  ‘DF2(1.0)///INDICATORvalue//.//COUNTRYvalue//’  <-  expression
@@ -1758,9 +1758,9 @@
  …);
--In other words, starting from the datasets explicitly calculated through VTL (in the example ‘DF2(1.0)/GDPPERCAPITA.USA’ and so on), the first step consists in calculating other (non-persistent) VTL datasets (in the example DF2bis_GDPPERCAPITA_USA and so on) by adding the identifiers INDICATOR and COUNTRY with the desired values (//INDICATORvalue// and //COUNTRYvalue)//. Finally, all these non-persistent data sets are united and give the final result DF2(1.0)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[38~]^^>>path:#_ftn38]](%%), which can be mapped one-to-one to the homonymous SDMX dataflow having the dimension components TIME_PERIOD, INDICATOR and COUNTRY.
++In other words, starting from the datasets explicitly calculated through VTL (in the example ‘DF2(1.0)/GDPPERCAPITA.USA’ and so on), the first step consists in calculating other (non-persistent) VTL datasets (in the example DF2bis_GDPPERCAPITA_USA and so on) by adding the identifiers INDICATOR and COUNTRY with the desired values (//INDICATORvalue// and //COUNTRYvalue)//. Finally, all these non-persistent data sets are united and give the final result DF2(1.0)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[38~]^^>>path:#_ftn38]](%%), which can be mapped one-to-one to the homonymous SDMX dataflow having the dimension components TIME_PERIOD, INDICATOR and COUNTRY.
--Therefore, mapping different VTL datasets having the same data structure to different parts of a SDMX dataflow, i.e. in the direction from VTL to SDMX, through the ordered concatenation notation is equivalent to a proper use of the operators “calc” and “union” on such datasets. [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[39~]^^>>path:#_ftn39]](%%)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[40~]^^>>path:#_ftn40]]
++Therefore, mapping different VTL datasets having the same data structure to different parts of a SDMX dataflow, i.e. in the direction from VTL to SDMX, through the ordered concatenation notation is equivalent to a proper use of the operators “calc” and “union” on such datasets. [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[39~]^^>>path:#_ftn39]](%%)[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[40~]^^>>path:#_ftn40]]
  It is worth noting that in the direction from VTL to SDMX it is mandatory to specify the value for every Dimension on which the mapping is based (in other word, in the name of the calculated VTL dataset is not possible to omit the value of some of the Dimensions).
@@ -1809,7 +1809,7 @@
  Domain) is not identifiable. As a consequence, the definition of the VTL rulesets, which in VTL can refer either to enumerated or non-enumerated value domains, in SDMX can refer only to enumerated Value Domains (i.e. to SDMX Codelists).
--As for the mapping between VTL variables and SDMX Concepts, it should be noted that these artefacts do not coincide perfectly. In fact, the VTL variables are  represented variables, defined always on the same Value Domain (“Representation” in SDMX) independently of the data set / data structure in which they appear[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[41~]^^>>path:#_ftn41]](%%), while the SDMX Concepts can have different Representations in different DataStructures.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[42~]^^>>path:#_ftn42]](%%) This means that one SDMX Concept can correspond to many VTL Variables, one for each representation the Concept has.
++As for the mapping between VTL variables and SDMX Concepts, it should be noted that these artefacts do not coincide perfectly. In fact, the VTL variables are  represented variables, defined always on the same Value Domain (“Representation” in SDMX) independently of the data set / data structure in which they appear[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[41~]^^>>path:#_ftn41]](%%), while the SDMX Concepts can have different Representations in different DataStructures.[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[42~]^^>>path:#_ftn42]](%%) This means that one SDMX Concept can correspond to many VTL Variables, one for each representation the Concept has.
  Therefore, it is important to be aware that some VTL operations (for example the binary operations at data set level) are consistent only if the components having the same names in the operated VTL data sets have also the same representation (i.e. the same Value Domain as for VTL).   For example, it is possible to obtain correct results from the VTL expression
@@ -2154,7 +2154,7 @@
  |N|fixed number of digits used in the preceding  textual representation of the month or the day
  | |
--The default conversion, either standard or customized, can be used to deduce automatically the representation of the components of the result of a VTL transformation. In alternative, the representation of the resulting SDMX Dataflow can be given explicitly by providing its DataStructureDefinition. In other words, the representation specified in the DSD, if available, overrides any default conversion[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[43~]^^>>path:#_ftn43]](%%).
++The default conversion, either standard or customized, can be used to deduce automatically the representation of the components of the result of a VTL transformation. In alternative, the representation of the resulting SDMX Dataflow can be given explicitly by providing its DataStructureDefinition. In other words, the representation specified in the DSD, if available, overrides any default conversion[[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)^^~[43~]^^>>path:#_ftn43]](%%).
  === 10.4.5 Null Values ===
@@ -2226,14 +2226,22 @@
  The difference between the two is that for the first method, **SubmitXml**, the XmlSerializer will expect an element named **input** to be an immediate child of the **SubmitXml** element in the SOAP body. The second method, **SubmitXmlAny**, will not care what the name of the child of the **SubmitXmlAny** element is. It will plug whatever XML is included into the input parameter. The message style from ASP.NET Help for the two methods is shown below. First we look at the message for the method without the **XmlAnyElement** attribute.
++[[image:1747854163928-581.png]]
++
  Now we look at the message for the method that uses the **XmlAnyElement** attribute.
++[[image:1747854190641-364.png]]
++
++[[image:1747854236732-512.png]]
++
  The method decorated with the **XmlAnyElement** attribute has one fewer wrapping elements. Only an element with the name of the method wraps what is passed to the **input** parameter.
--For more information please consult:  [[http:~~/~~/msdn.microsoft.com/en>>url:http://msdn.microsoft.com/en-us/library/aa480498.aspx]][[->>url:http://msdn.microsoft.com/en-us/library/aa480498.aspx]][[us/library/aa480498.aspx>>url:http://msdn.microsoft.com/en-us/library/aa480498.aspx]][[url:http://msdn.microsoft.com/en-us/library/aa480498.aspx]]
++For more information please consult: [[http:~~/~~/msdn.microsoft.com/en-us/library/aa480498.aspx>>http://msdn.microsoft.com/en-us/library/aa480498.aspx]]
  Furthermore at this point the problem with the different requests has been solved. However there is still the difference in the produced WSDL that has to be taken care. The automatic generated WSDL now doesn’t insert the extra element, but defines the content of the operation wrapper element as “xsd:any” type.
++[[image:1747854286398-614.png]]
++
  Without a common WSDL still the solution doesn’t enforce interoperability. In order to
  “fix” the WSDL, there two approaches. The first is to intervene in the generation process. This is a complicated approach, compared to the second approach, which overrides the generation process and returns the envisioned WSDL for the SDMX Web Service.
@@ -2246,16 +2246,28 @@
  In the context of the SDMX Web Service, applying the above solution translates into the following:
++[[image:1747854385465-132.png]]
++
  The SOAP request/response will then be as follows:
  **GenericData Request**
++[[image:1747854406014-782.png]]
++
  **GenericData Response**
++[[image:1747854424488-855.png]]
++
  For overriding the automatically produced WSDL, in the solution explorer right click the project and select “Add” -> “New item…”. Then select the “Global Application Class”. This will create “.asax” class file in which the following code should replace the existing empty method:
++[[image:1747854453895-524.png]]
++
++[[image:1747854476631-125.png]]
++
  The SDMX_WSDL.wsdl should reside in the in the root directory of the application. After applying this solution the returned WSDL is the envisioned. Thus in the request message definition contains:
++[[image:1747854493363-776.png]]
++
  ----
  [[~[1~]>>path:#_ftnref1]] The seconds can be reported fractionally
@@ -2347,3 +2347,5 @@
  [[~[42~]>>path:#_ftnref42]] A Concept becomes a Component in a DataStructureDefinition, and Components can have different LocalRepresentations in different DataStructureDefinitions, also overriding the (possible) base representation of the Concept.
  [[~[43~]>>path:#_ftnref43]] The representation given in the DSD should obviously be compatible with the VTL data type.
++
++{{putFootnotes/}}

1747854163928-581.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+29.8 KB

Content

1747854190641-364.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+31.5 KB

Content

1747854236732-512.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+2.0 KB

Content

1747854286398-614.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854385465-132.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854406014-782.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854424488-855.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854453895-524.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854476631-125.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747854493363-776.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855024745-946.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855054559-410.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855075263-887.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855402867-579.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855462293-368.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content

1747855493531-357.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+xwiki:XWiki.helena

Size

...	...	@@ -1,0 +1,1 @@
	1	+55.0 KB

Content